Open Access
Om Sunil Chaudhari
Manupratap Singh Parmar
- Student Jain University Set Bangalore
- Student SSBT COET Bambhori, Jalgaon
Abstract
In the industrial application hydraulic lifts have a variety of applications on a massive scale. As the energy resources required for the operation are relatively high as compared to the output provided by lifts, there is an alarming rate to optimize the process. So, to bridge the gap we have come up with an innovative and exclusive fabrication of the hydraulic lift systems based on the use of Composite Fluids for the operation. This will eventually lead to the energy conservation at the input level with high performance rate and output. To maintain the same displacement at output by reducing the input effort of the hydraulic system compared to existing hydraulic system by using a ‘Non-Uniform Composite Fluid’ by employing the thermal effects on it as well.
Keywords: Hydraulic lift, composite fluid application, energy conservation, thermal application, numerical analysis
[This article belongs to Recent Trends in Fluid Mechanics(rtfm)]
Browse Figures
References
1. Theocharis Ch. Dimitrios. (November 2013). Energy efficiency of the hydraulic lifts: reality and perspectives. [online]. Available at: http://biofial.gr/biofial/wp-content/uploads/2014/01/article- ENG-low.pdf
2. Yang Huayong, Sun W, Xu B. New investigation in energy regeneration of hydraulic elevators. IEEE ASME Trans Mechatron. 2007;12(5):519–26. doi: 10.1109/TMECH.2007.905691.
3. Barewar Abhishek Madhukar, Padole Abhishek Ashok, Yugal Dhanpal Nagpure, et al. Fabrication of automatic screw jack. Int J Adv Res Dev. 2018;3(4):64–7.
4. TechTarget Contributor (2017). hydraulics. [online] WhatIs.com. Available at: https://whatis.techtarget.com/definition/hydraulics
5. Basic hydraulic principles. Vol. 07. p. 25 [online]; 2009. Available from: http://www.brighthubengineering.com/hydraulicscivilengineering/43171-what-are-the-basic- principles-ofhydraulics/.
6. iKONIC mercury hydraulic lift, UK bespoke lift specialist. Providing design, engineering, installation and service solutions for Passenger, Goods and Platform lifts [online]. Available from: https://www.ikoniclifts.co.uk/products/mercury-hydraulic-passenger-lift/.
7. Saeid NH, Seetharamu KN. Finite element analysis for co-current and counter-current parallel flow three-fluid heat exchanger. Int J Numer Methods Heat Fluid Flow. 2006;16(3):324–37. doi: 10.1108/09615530610649744.
8. Engineeringtoolbox.com. (2021). Mercury—Melting Curve—Temperature vs. Pressure. Mercury: Thermodynamic Properties. [online] Available at: https://www.engineeringtoolbox.com/mercury- d_1002.html
Recent Trends in Fluid Mechanics
| Volume | 8 |
| Issue | 1 |
| Received | April 3, 2021 |
| Accepted | April 29, 2021 |
| Published | April 29, 2023 |