SALISU NUHU
MAS’UD ADAMU KAZAURE
ABDULHAMID NAJIB SANI
- Research Scholar School of Science And Technology Hussaini Adamu Federal Polytechnic Kazaure Jigawa State Nigeria
- Doctor School of Science And Technology Hussaini Adamu Federal Polytechnic Kazaure Jigawa State Nigeria
- Professor School of Science And Technology Hussaini Adamu Federal Polytechnic Kazaure Jigawa State Nigeria
Abstract
The production of flow tile using recycled low density polyethylene and groundnut shell as filler with the particle size of 120µm was carried out in this project . 10 pphr of all the fillers were weighed and mixed with recycled low density polyethylene on two roll mill machines. The result on this work showed that on FTIR five functional groups were identified and they are; OH, C-H, CH2/CH3, C-O, C=H. While for water absorption showed that the sample was absorbed in water that is to show that production is possible when there is availability of water. For the hardness test, it showed that the product has good mechanical properties. A steady temperature of 120°C was selected for the two roll mill machines in order to facilitate the compounding of plastic. Recycled low density polyethylene was fed into the two roll mill machine’s nip until it was masticated. After adding half of the filler, the material was cut diagonally and cross-mixed. Then, the remaining filler was added and the material was cross-mixed diagonally until a bond was formed. After that, the product was shot into a compression molding machine and compressed for ten minutes at a temperature of roughly 160 oC before being moved from the heating chamber to the cooling chamber (a process known as vulcanization).
Keywords: Recycle Low Density Polyethylene, Groundnut Shell, Sand, Processing Oil, Distilled Water
[This article belongs to Journal of Thin Films, Coating Science Technology & Application(jotcsta)]
References
- Ayo MD, Chukwu N, Tenebe OG, (2015) chemistry of polymer, excess of polymer chemistry first edition page 7
- BK sharma, (2002) , polymer chemistry, history and properties of polyethylene 3rd edition page 364-370
- Darweesh H , (2002) academic journal the use of klin waste in the production of floor tile volm 20, page 5-11
- Fried J R, (2009), polymer science technology filler property Second Edition page 551-567
- Sani I, (2016), polymer chemistry for beginners application of filler first edition page 20-44
- Premamoy G , (2018) polymer science journal the use of klin waste in the production of floor tile vol 20 page 5-11
- upien.org. cloud ./pin/polymer/pin.com Abdullah, A.H, Russell, D.S, and Abdulwahab, A.S. (2011) “Particle reinforced polymers” J.Bas. Res(Science), 37(3A), (36-42).
- Al-Farsi and hee C.Y (2008) “optimization of phonetics and dietary fiber extraction from dates. Journal of food chemistry 108:977-985
- Ali I. Al-Mosawi, Shaymaa Abbas Abdulsada, and Abbass A. Hashim (2018) “Sustainable Procedure for Using Waste of Date Seeds as a Reinforcement Material for Polymeric Composites” Open Access Library Journal, 5: e4384. https://doi.org/10.4236/oalib.1104384
- Abduati Alnaid, N Z Noriman, Omar S Dahham, R Hamzah, Marwa N Al-Samarrai, S Z Syed Idrus, Z Shayfull (2017) “Effects of Date Seeds Size and Loading on Properties of Linear Low-Density Polyethylene/Date Seeds Powder Composites” IOP Conf. Series:Journal of Physics Conference Series 1019(1):012060 DOI:10.1088/1742-6596/1019/1/012060
- Abduati Elnaid and Nik Noriman Zulkepli (2021) “Date Seeds Fiber Reinforced Low-Density Polyethylene: Effect of Stearic Acid on its Mechanical and Morphological Characteristics” Journal of Materials Science Forum 1021:290-298.DOI:10.4028/www.scientific.net/MSF.1021.290
Journal of Thin Films, Coating Science Technology & Application
| Volume | 11 |
| Issue | 01 |
| Received | April 3, 2024 |
| Accepted | May 8, 2024 |
| Published | June 3, 2024 |