Design and Thermal Analysis of Y2O3ZrO2 Ceramic Coated IC Engine Piston Based on FEA

Open Access

Year : 2021 | Volume : | Issue : 2 | Page : 1-7

    Abdul Jabbar Ansari

  1. Assistant Professor, Department of Mechanical Engineering, Bansal Institute of Engineering & Technology Lucknow, Uttar Pradesh, India


This paper includes the design and thermal analysis of an uncoated & coated IC engine piston made of aluminium-silicon alloy. Thermal analysis is performed on pistons cylinder comprised of aluminium alloys covered with artistic material (Y2O3ZrO2). The bonding is done by unique material (Ni-Cr-Al). Designing is done by appropriate machine design approach and the piston dimensions are determined by finite element analysis (FEA). FEA was performed using ANSYS. The coating effects on the thermal behaviour of the pistons are also investigated.

Keywords: Finite element analysis, thermal barrier coatings, coating of piston, thermal analysis of piston

[This article belongs to Journal of Refrigeration, Air conditioning, Heating and ventilation(jorachv)]

How to cite this article: Abdul Jabbar Ansari Design and Thermal Analysis of Y2O3ZrO2 Ceramic Coated IC Engine Piston Based on FEA jorachv 2021; 8:1-7
How to cite this URL: Abdul Jabbar Ansari Design and Thermal Analysis of Y2O3ZrO2 Ceramic Coated IC Engine Piston Based on FEA jorachv 2021 {cited 2021 Oct 29};8:1-7. Available from:

Full Text PDF Download

Browse Figures


1. Li CH. Piston thermal deformation and friction considerations (No. 820086) [SAE technical paper]; 1982.
2. Hejwowski T, Weroński A. The effect of thermal barrier coatings on diesel engine performance. Vacuum. 2002;65(3–4):427–32. doi: 10.1016/S0042–207X(01)00452–3.
3. Silva FS. Fatigue on engine pistons–A compendium of case studies. Eng Fail Anal. 2006;13(3):480–92. doi: 10.1016/j.engfailanal.2004.12.023.
4. Kumar U, Karimi MN. Low grade waste heat recovery for optimized energy efficiencies and enhanced sustainability in process industries: a comprehensive review. Int J Multidiscip Sci Eng. 2014;5.
5. Pierz PM. Thermal barrier coating development for diesel engine aluminum pistons. Surf Coatings Technol. 1993;61(1–3):60–6. doi: 10.1016/0257–8972(93)90203-Z.
6. Singh L, Rawat SS, Hasan T, Kumar U. Finite element analysis of piston in ANSYS. Int J Mod Trends Eng Res. 2015;2.
7. Cerit M. Thermo mechanical analysis of a partially ceramic coated piston used in an SI engine. Surf Coatings Technol. 2011;205(11):3499–505. doi: 10.1016/j.surfcoat.2010.12.019.
8. Bhandari VB. Design of machine elements. Tata: McGraw-Hill Education; 2010.
9. Toyama K, Yoshimitsu T, Nishiyama T, Shimauchi T, Nakagaki T. Heat insulated turbocompound engine. SAE Trans. 1983:1086–97.
10. Miyairi Y. Computer simulation of an LHR DI diesel engine. SAE Trans. 1988:282–94.
11. Khurmi RS, Gupta JK. A Textbook of Machine Design. Eurasia; 2005.
12. Yingkui G, Zhibo Z. Strength analysis of diesel engine crankshaft based on PRO/E and ANSYS. 2011 Third International Conference on Measuring Technology and Mechatronics Automation. 2011, pp. 362-364, doi: 10.1109/ICMTMA.2011.661.
13. Hohenberg GF. Advanced approaches for heat transfer calculations. SAE Trans. 1979:2788–806.
14. Cerit M, Coban M. Temperature and thermal stress analyses of a ceramic-coated aluminum alloy piston used in a diesel engine. Int J Therm Sci. 2014;77:11–8. doi: 10.1016/j.ijthermalsci.2013.10.009.
15. Prasad R, Samria NK. Heat transfer and stress fields in the inlet and exhaust valves of a semi- adiabatic diesel engine. Comput Struct. 1990;34(5):765–77. doi: 10.1016/0045–7949(90)90144-Q.

Regular Issue Open Access Article
Volume 8
Issue 2
Received August 5, 2021
Accepted September 9, 2021
Published October 29, 2021