Open Access
Dr. Sunil Kumar Gupta,
Dr. Javed Khan Bhutto,
Dr. Sunil Kumar Chaudhary,
Ashish Raj,
- Professor Department of Electrical and Electronics Engineering, Poornima University, Jaipur Rajasthan India
- Associate Professor Department of Electrical Engineering, King Khalid University, Abha, Saudi Arabia Saudi Arabia Dubai
- Professor Department of Electrical Engineering, Galgotia College of Engineering (GCET), Greater Noida Uttar Pradesh India
- Associate Professor Department of Electrical and Electronics Engineering, Poornima University, Jaipur Rajasthan India
Abstract
This paper examines the pivotal role of advanced composite materials in the realm of current electric vehicles (EVs). With their exceptional qualities and lightweight nature, composites have become the preferred material across diverse industries. Conventional internal combustion cars, notorious for their heavy and inefficient design, have exacerbated pollution levels, particularly in urban areas. In response, lightweight composite materials are gradually replacing heavier metals in vehicle production, offering enhanced durability, fatigue resistance, and shape ability. However, the selection of advanced composite materials involves a tradeoff between price and performance. This paper explores the latest developments in the global automotive composites market and their profound impact on industry trends. Moreover, the global drive towards sustainable transportation and carbon reduction is closely aligned with the use of composite materials in automobiles. The paper concludes by proposing avenues for future research aimed at overcoming challenges and maximizing the utilization of composite materials in automotive applications, particularly in the context of electric vehicles.
Keywords: Electric Vehicles, Recyclable Polymers, Composites, Sustainability, India, Automotive Industry
[This article belongs to Special Issue under section in Journal of Polymer and Composites(jopc)]
Browse Figures
References
- White M. Showcasing successful high volume application of aluminium into body in white demonstrating weight saving opportunities using aluminium. Global Automotive Lightweight Materials Conference; London, UK; 2013 Sep 24-25.
- Frost S, Sullivan A. Global analysis of weight reduction strategies of major OEMs. Market Engineering Research. 2009.
- Jasinski D, Meredith J, Kirwan K. A comprehensive review of full cost accounting methods and their applicability to the automotive industry. J Clean Prod Part A. 2015;108:1123–39.
- Bein T, Mayer D, Hagebeuker L, Bachinger A, Bassan D, Pluymers B, Delogu M. Enhanced lightweight design – first results of the FP7 project ENLIGHT. Transp Res Procedia. 2016;14:1031–40.
- Del Pero F, Delogu M, Pierini M. The effect of light weighting in automotive LCA perspective: estimation of mass-induced fuel consumption reduction for gasoline turbocharged vehicles. J Clean Prod. 2017;154:566–77.
- Lamiaa A. Reducing carbon dioxide emissions from electricity sector using smart electric grid applications. Hindawi Publ Corp J Eng. 2013;8.
- Bajpai R, Chandrasekhar U, Arankalle A. Innovative design, analysis and development practices in aerospace and automotive engineering. Lecture Notes in ME. Springer; 2014. p. 235–41.
- Franzen M. Developing multi-material vehicles with composite parts to identify significant weight reduction opportunities. Global Automotive Lightweight Materials Conference; London, UK; 2013 Sep 24-25.
- Ahmad F, Choi HS, Park MK. A review: natural fiber composites selection in view of mechanical, light weight, and economic properties. Macromol Mater Eng. 2015;300:10–24.
- Brookbank P, Savage L, Evans KE. Economical carbon and cellulosic sheet molding compounds for semi and non-structural applications. J Reinf Plast Compos. 2015;34:437–53.
- Fu SY, Lauke B, Mader E. Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites. Compos Part A. 2010;31:1117–25.
- Zhang J, Chaisombat K, He S. Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures. Mater Des. 2012;36:75–80.
- Pervaiz M, Sain M. Recycling of paper mill bio solids: a review on current practices and emerging bio refinery initiatives. CLEAN Soil Air Water. 2015;43:919–26.
- Andriankaja H, Vallet F, Le Duigou J, Eynard B. A method to eco design structural parts in the transport sector based on product life cycle management. J Clean Prod. 2015;94:165–76.
- Kelly JC, Sullivan JL, Burnham A, Elgowainy A. Impacts of vehicle weight reduction via material substitution on life-cycle greenhouse gas emissions. Environ Sci Technol. 2015;49:12535–42.
- Kim HC, Wallington TJ. Life cycle assessment of vehicle light weighting: A physics based model of mass-induced fuel consumption. Environ Sci Technol. 2013;47:14358–66.
- Das S. Life cycle assessment of carbon fiber-reinforced polymer composites. Int J Life Cycle Assess. 2011;16:268–82.
- Rathore DK, Prusty RK, Kumar DS, Ray BC. Mechanical performance of CNT-filled glass fiber / epoxy composite in in-situ elevated temperature environments emphasizing the role of CNT content. Compos Part A. 2016;84:364–76.
- Gantayat S, Rout D, Swain SK. Mechanical properties of functionalized multi-walled carbon nanotube / epoxy nano composites. Mater Today Proc. 2017;4:4061–4.
- He D, et al. Multifunctional polymer composites reinforced by carbon nano tubes – Alumina hybrids with urchin-like structure. Mater Today Commun. 2017;11:94–102.
- Hu D, et al. Ultrastrong and excellent dynamic mechanical properties of carbon nanotube composites. Compos Sci Technol. 2017;141:137–44.
- Zakaria MR, Helmi M, Kudus A, Akil H. Comparative study of graphene nanoparticle and multiwall carbon nanotube filled epoxy nanocomposites based on mechanical, thermal and dielectric properties. Compos Part B. 2017;119:57–66.
- Koffler C. Life cycle assessment of automotive light weighting through polymers under US boundary conditions. Int J Life Cycle Assess. 2013;19:538–45.
- Dhingra R, Das S. Life cycle energy and environmental evaluation of downsized vs. lightweight material automotive engines. J Clean Prod. 2014;358–70.
- Del Pero F, Delogu M, Pierini M. The effect of light weighting in automotive LCA perspective: estimation of mass-induced fuel consumption reduction for gasoline turbocharged vehicles. J Clean Prod. 2017;154:566–77.
- Gali V, Varaprasad MV, Gupta SK, Gupta M. Performance investigation of multifunctional grid connected PV interleaved inverter with power quality enhancement. Energy Systems. 2021;1–23.
- Gupta SK. Electrifying India’s Transportation: Economic Perspectives on Electric Vehicle Impact, Opportunities, and Challenges. Eur Econ Lett. 2024;14(2):151–62. Available from: https://doi.org/10.52783/eel.v14i2.1282.
- Duleba B, Dulebova L, Spisak E. Simulation and evaluation of carbon/epoxy composite systems using FEM and tensile test. Procedia Eng. 2014;96:70–4.
- Yoon HS, Washington G, Danak A. Modeling, Optimization, and Design of Efficient Initially Curved Piezoceramic Unimorphs for Energy Harvesting Applications. J Intell Mater Syst Struct. 2005;16:877–88.
- Palaniappan M, Palanisamy S, Khan R, H. Alrasheedi N, Tadepalli S, Murugesan TM, Santulli C. Synthesis and suitability characterization of microcrystalline cellulose from Citrus x sinensis sweet orange peel fruit waste-based biomass for polymer composite applications. Journal of Polymer Research. 2024 Apr;31(4):105.
- Ayrilmis N, Kanat G, Yildiz Avsar E, Palanisamy S, Ashori A. Utilizing waste manhole covers and fibreboard as reinforcing fillers for thermoplastic composites. Journal of Reinforced Plastics and Composites. 2024 Mar 7:07316844241238507.
- Palaniappan M, Palanisamy S, Murugesan TM, Alrasheedi NH, Ataya S, Tadepalli S, Elfar AA. Novel Ficus retusa L. aerial root fiber: a sustainable alternative for synthetic fibres in polymer composites reinforcement. Biomass Conversion and Biorefinery. 2024 Mar 19:1-7.
- Palanisamy S, Murugesan TM, Palaniappan M, Santulli C, Ayrilmis N. Fostering sustainability: The environmental advantages of natural fiber composite materials–a mini review. Environmental Research and Technology. 2024 Jun 6;7.
- Mylsamy B, Shanmugam SK, Aruchamy K, Palanisamy S, Nagarajan R, Ayrilmis N. A review on natural fiber composites: Polymer matrices, fiber surface treatments, fabrication methods, properties, and applications. Polymer Engineering & Science. 2024 Mar 19.
- Kurien RA, Selvaraj DP, Sekar M, Koshy CP, Paul C, Palanisamy S, Santulli C, Kumar P. A comprehensive review on the mechanical, physical, and thermal properties of abaca fibre for their introduction into structural polymer composites. Cellulose. 2023 Sep;30(14):8643-64.
Journal of Polymer and Composites
Volume | 12 |
Special Issue | 03 |
Received | April 30, 2024 |
Accepted | June 15, 2024 |
Published | June 25, 2024 |