[{“box”:0,”content”:”[if 992 equals=”Open Access”]n
n
Open Access
nn
n
n[/if 992]n
n
n
n
n
n
Dr. Ashish Raj, Dr. Javed Khan Bhutto, Dr. Surendra Kumar Sharma, Dr. Sunil Kumar Gupta
n
- n t
n
n
n[/foreach]
n
n[if 2099 not_equal=”Yes”]n
- [foreach 286] [if 1175 not_equal=””]n t
- Associate Professor, Associate Professor, Associate Professor, Professor Department of Electrical and Electronics Engineering, Poornima University, Jaipur, Department of Electrical Engineering, King Khalid University, Abha, Department of Electrical and Electronics Engineering, Poornima University, Department of Electrical and Electronics Engineering, Poornima University, Jaipur Rajasthan, Saudi Arabia, Rajasthan, Rajasthan India, Dubai, India, India
n[/if 1175][/foreach]
n[/if 2099][if 2099 equals=”Yes”][/if 2099]n
Abstract
nElectric vehicles (EVs) represent a pivotal shift toward sustainable transportation and climate change mitigation. In India, the transition to EVs is driven by government policies, technological advancements, and growing environmental awareness. However, the sustainability of EVs extends beyond their operational efficiency to the materials used in their construction. This paper explores the role of recyclable polymers and composites in enhancing the sustainability of EVs in India. The study highlights the advantages of using these materials, including weight reduction, improved fuel efficiency, and recyclability, aligning with the principles of a circular economy. The research delves into the properties and benefits of various recyclable polymers and composites, such as Carbon Fiber-Reinforced Polymer (CFRP) and Glass Fiber-Reinforced Polymer (GFRP), compared to traditional automotive materials like steel and aluminum. The analysis reveals that these advanced materials significantly reduce vehicle weight, leading to enhanced fuel efficiency and extended driving range. For instance, the Tata Nexon EV and Mahindra eVerito, incorporating these materials, demonstrate notable improvements in range per charge and overall performance. Environmental benefits are also a key focus, with recyclable polymers and composites offering lower CO2 emissions and energy consumption during production compared to traditional materials. The paper presents detailed comparisons of energy consumption and CO2 emissions, emphasizing the environmental advantages of these sustainable materials. Despite the high initial production costs of advanced composites, the long-term economic benefits, including material reuse and reduced fuel consumption, are substantial. Case studies of Tata Motors and Mahindra Electric illustrate the practical implementation of recyclable polymers and composites in EV manufacturing. The Tata Nexon EV and Mahindra eVerito models showcase significant weight reduction and improved efficiency due to the integration of these materials. The paper also addresses the challenges of adopting recyclable polymers and composites, such as the need for robust recycling infrastructure and the high initial production costs.In conclusion, the research underscores the potential of recyclable polymers and composites to transform the EV industry in India, contributing to sustainable development goals. The study calls for increased investment in research and development, enhanced recycling technologies, and supportive policies to facilitate the widespread adoption of these materials. By leveraging the benefits of recyclable polymers and composites, the automotive industry can make significant strides toward achieving a greener, more sustainable future.
n
Keywords: Electric Vehicles, Recyclable Polymers, Composites, Sustainability, India, Automotive Industry
n[if 424 equals=”Regular Issue”][This article belongs to Journal of Polymer and Composites(jopc)]
n
n
n
n
n
nn[if 992 equals=”Open Access”] Full Text PDF Download[/if 992] n[if 992 not_equal=”Open Access”]
[/if 992]n[if 992 not_equal=”Open Access”] nn
n[/if 992]nn[if 379 not_equal=””]nBrowse Figures
n
n[/if 379]n
References
n[if 1104 equals=””]n
- Amasawa E, Hasegawa M, Yokokawa N, Nakatani J. Environmental Performance of an Electric Vehicle Composed of 47% Polymers and Polymer Composites. Sustainable Materials and Technologies. 2020.
- Delogu M, Zanchi L, Dattilo CA, Pierini M. Innovative Composites and Hybrid Materials for Electric Vehicles Lightweight Design in a Sustainability Perspective. Materials Today. 2017.
- Krauklis AE, Karl CW, Gagani AI, Ek T. Composite Material Recycling Technology—State-of-the-Art and Sustainable Development for the 2020s. J Compos Sci. 2021.
- Wazeer A, Das A, Abeykoon C, Sinha A. Composites for Electric Vehicles and Automotive Sector: A Review. Green Energy and Technology. 2023.
- Gupta P, Toksha B, Patel B, Rushiya Y. Recent Developments and Research Avenues for Polymers in Electric Vehicles. Chem Rec. 2022.
- Elwert T, Goldmann D, Römer F, Buchert M, Merz C. Current Developments and Challenges in the Recycling of Key Components of (Hybrid) Electric Vehicles. Recycling. 2015.
- Vieyra H, Molina-Romero JM, Calderón-Nájera JD, León-Martínez FM. Engineering, Recyclable, and Biodegradable Plastics in the Automotive Industry: A Review. Polymers. 2022.
- Oh E, Godoy Zúniga MM, Nguyen TB, Kim BH. Sustainable Green Composite Materials in the Next-Generation Mobility Industry: Review and Prospective. 2024.
- Miller L, Soulliere K, Sawyer-Beaulieu S, Tseng S, Tam E. Challenges and Alternatives to Plastics Recycling in the Automotive Sector. Materials. 2014.
- Khalid MY, Arif ZU, Ahmed W, Arshad H. Recent Trends in Recycling and Reusing Techniques of Different Plastic Polymers and Their Composite Materials. Sustainable Materials and Technologies. 2022.
- Tian J, Chen M. Sustainable Design for Automotive Products: Dismantling and Recycling of End-of-Life Vehicles. Waste Manag. 2014.
- Norgren A, Carpenter A, Heath G. Design for Recycling Principles Applicable to Selected Clean Energy Technologies: Crystalline-Silicon Photovoltaic Modules, Electric Vehicle Batteries, and Wind Turbine Blades. J Sustain Metall. 2020.
- Manzetti S, Mariasiu F. Electric Vehicle Battery Technologies: From Present State to Future Systems. Renew Sustain Energy Rev. 2015.
- Choi JY, Jeon JH, Lyu JH, Park J, Kim GY. Current Applications and Development of Composite Manufacturing Processes for Future Mobility. Green Manuf. 2023.
- Fan E, Li L, Wang Z, Lin J, Huang Y, Yao Y. Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects. Chem Rev. 2020.
- Agnelli J, Benedetti D, Fantuzzi N, Pierini M. The Exploitation of Sustainable Composite Materials for the Manufacturing of High-Efficient Electric Cars. Appl Eng. 2021.
- Yang Y, Boom R, Irion B, Van Heerden DJ, It B. Recycling of Composite Materials. Compos Process. 2012.
- Jagadeesh P, Mavinkere Rangappa S, Liguori LK. Sustainable Recycling Technologies for Thermoplastic Polymers and Their Composites: A Review of the State of the Art. Sustain Compos. 2022.
- Muhammad A, Rahman MR, Baini R. Applications of Sustainable Polymer Composites in Automobile and Aerospace Industry. Sustain Polym Compos. 2021.
- Ribeiro MCS, Fiúza A, Ferreira A, Dinis ML. Recycling Approach Towards Sustainability Advance of Composite Materials’ Industry. Recycling. 2016.
- Bhadra J, Al-Thani N, Abdulkareem A. Recycling of Polymer-Polymer Composites. Micro Nano Fibrillar Compos. 2017.
- Abedsoltan H. Applications of Plastics in the Automotive Industry: Current Trends and Future Perspectives. Polym Eng Sci. 2024.
- Fu Y, Schuster J, Petranikova M, Ebin B. Innovative Recycling of Organic Binders from Electric Vehicle Lithium-Ion Batteries by Supercritical Carbon Dioxide Extraction. Energy Conserv Recycling. 2021.
- Ghosh M, Ghosh A, Roy A. Renewable and Sustainable Materials in Automotive Industry. J Renew Sustain Mater. 2020.
- Aly NM. A Review on Utilization of Textile Composites in Transportation Towards Sustainability. IOP Conf Ser Mater Sci Eng. 2017.
- Abdallah R, Juaidi A, Savaş MA, Çamur H. A Critical Review on Recycling Composite Waste Using Pyrolysis for Sustainable Development. Energies. 2021.
- Thompson DL, Hartley JM, Lambert SM, Shiref M. The Importance of Design in Lithium Ion Battery Recycling–A Critical Review. Green Chem. 2020.
- Barbosa JC, Gonçalves R, Costa CM, Dias ML. Toward Sustainable Solid Polymer Electrolytes for Lithium-Ion Batteries. ACS Sustain Chem Eng. 2022.
- Mohanty AK, Vivekanandhan S, Pin JM, Misra M. Composites from Renewable and Sustainable Resources: Challenges and Innovations. Science. 2018.
- Gupta SK. Electrifying India’s Transportation: Economic Perspectives on Electric Vehicle Impact, Opportunities, and Challenges. Eur Econ Lett. 2024;14(2):151–62. Available from: https://doi.org/10.52783/eel.v14i2.1282.
- Mohanty AK, Wu F, Mincheva R. Sustainable Polymers. Nat Rev Mater. 2022.
nn[/if 1104][if 1104 not_equal=””]n
- [foreach 1102]n t
- [if 1106 equals=””], [/if 1106][if 1106 not_equal=””],[/if 1106]
n[/foreach]
n[/if 1104]
nn
nn[if 1114 equals=”Yes”]n
n[/if 1114]
n
n
n
| Volume | ||
| [if 424 equals=”Regular Issue”]Issue[/if 424][if 424 equals=”Special Issue”]Special Issue[/if 424] [if 424 equals=”Conference”][/if 424] | ||
| Received | May 23, 2024 | |
| Accepted | June 11, 2024 | |
| Published | June 25, 2024 |
n
n
n
n
n
n function myFunction2() {n var x = document.getElementById(“browsefigure”);n if (x.style.display === “block”) {n x.style.display = “none”;n }n else { x.style.display = “Block”; }n }n document.querySelector(“.prevBtn”).addEventListener(“click”, () => {n changeSlides(-1);n });n document.querySelector(“.nextBtn”).addEventListener(“click”, () => {n changeSlides(1);n });n var slideIndex = 1;n showSlides(slideIndex);n function changeSlides(n) {n showSlides((slideIndex += n));n }n function currentSlide(n) {n showSlides((slideIndex = n));n }n function showSlides(n) {n var i;n var slides = document.getElementsByClassName(“Slide”);n var dots = document.getElementsByClassName(“Navdot”);n if (n > slides.length) { slideIndex = 1; }n if (n (item.style.display = “none”));n Array.from(dots).forEach(n item => (item.className = item.className.replace(” selected”, “”))n );n slides[slideIndex – 1].style.display = “block”;n dots[slideIndex – 1].className += ” selected”;n }n”}]