An overview of dissimilar metals welding by cold metal transfer technique

[{“box”:0,”content”:”[if 992 equals=”Open Access”]

n

Open Access

n

[/if 992]n

n

Year : April 1, 2024 at 11:08 am | [if 1553 equals=””] Volume : [else] Volume :[/if 1553] | [if 424 equals=”Regular Issue”]Issue[/if 424][if 424 equals=”Special Issue”]Special Issue[/if 424] [if 424 equals=”Conference”][/if 424] : | Page : –

n

n

n

n

n

n

By

n

    n t

    [foreach 286]n

    n

    Indra Jeet Singh, Paras Kumar, Qasim Murtaza

  1. [/foreach]

    n

n

n[if 2099 not_equal=”Yes”]n

    [foreach 286] [if 1175 not_equal=””]n t

  1. PhD Scholar, Professor, Professor, Mechanical Engineering Department, Delhi Technological University, Mechanical Engineering Department, Delhi Technological University, Mechanical Engineering Department, Delhi Technological University, Delhi, Delhi, Delhi, India, India, India

    2. n[/if 1175][/foreach]

[/if 2099][if 2099 equals=”Yes”][/if 2099]nn

n

Abstract

nCold Metal Transfer (CMT) welding has emerged as a promising technique for joining dissimilar materials, offering enhanced weld quality and mechanical properties. This review article explores the application of CMT welding in joining different metal alloys, focusing on two significant cases: magnesium-aluminium and aluminium-stainless steel combinations. CMT welding minimizes intermetallic compound formation and produces high-strength joints in magnesium-aluminium combinations. CMT welding with a friction-surfaced aluminum coating offers strong metallurgical bonding in aluminum-stainless steel joints. Precise penetration control and superior tensile strength compared to MIG welding are notable advantages. Optimizing welding parameters and understanding microstructure characteristics are crucial for successful CMT welding of dissimilar materials, presenting promising applications across industries. The review also discusses the impact of welding parameters on the properties of CMT-welded joints, emphasizing the importance of optimizing these parameters to achieve desired results

n

n

n

Keywords: Cold Metal Transfer (CMT), Microstructure, Mechanical properties, Dissimilar metals

n[if 424 equals=”Regular Issue”][This article belongs to Journal of Polymer and Composites(jopc)]

n

[/if 424][if 424 equals=”Special Issue”][This article belongs to Special Issue under section in Journal of Polymer and Composites(jopc)][/if 424][if 424 equals=”Conference”]This article belongs to Conference [/if 424]

n

n

n

How to cite this article: Indra Jeet Singh, Paras Kumar, Qasim Murtaza An overview of dissimilar metals welding by cold metal transfer technique jopc ; :-

n

How to cite this URL: Indra Jeet Singh, Paras Kumar, Qasim Murtaza An overview of dissimilar metals welding by cold metal transfer technique jopc {cited };:-. Available from: https://journals.stmjournals.com/jopc/article=/view=0

n

n[if 992 equals=”Open Access”] Full Text PDF Download[else] nvar fieldValue = “[user_role]”;nif (fieldValue == ‘indexingbodies’) {n document.write(‘Full Text PDF‘);n }nelse if (fieldValue == ‘administrator’) { document.write(‘Full Text PDF‘); }nelse if (fieldValue == ‘jopc’) { document.write(‘Full Text PDF‘); }n else { document.write(‘ ‘); }n [/if 992] [if 379 not_equal=””]n

Browse Figures

n

n

[foreach 379]n

n[/foreach]n

nn

n

n[/if 379]n

n

References

n[if 1104 equals=””]n

  1. Naik and M. Madhavan, “Structural performance of cold metal transfer welding technique on cold-formed steel flare v-groove welds,” Thin-Walled Struct., vol. 190, 2023.
  2. Brezinová and J. Hašuľ, “Evaluation of Fillet Welds Properties Performed By Cold Metal Transfer Robotic Metal Active Gas Welding Technology,” Transport, vol. 38, no. 1, pp. 44–51, 2023.
  3. M. Burhanuddin, N. Redzuan, N. Ahmad, I. Sudin, and M. F. A. Zaharuddin, “Brief Review on Dissimilar Welding Using Cold Metal Transfer,” IOP Conf. Ser. Mater. Sci. Eng., vol. 884, no. 1, 2020.
  4. Pramod, N. S. Shanmugam, and C. K. Krishnadasan, “Studies on cold metal transfer welding of aluminium alloy 6061-T6 using ER 4043,” Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl., vol. 234, no. 7, pp. 924–937, 2020.
  5. Zhang, G. Li, H. Yan, and Y. Tian, “Effect of positive/negative electrode ratio on cold metal transfer welding of 6061 aluminum alloy,” Int. J. Adv. Manuf. Technol., vol. 106, no. 3–4, pp. 1453–1464, 2020.
  6. Shanker and R. Wattal, “A comprehensive survey on the cold metal transfer process in welding similar and dissimilar materials and for cladding,” Pro
  7. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., vol. 237, no. 10, pp. 2360–2391, 2023.
  8. Koli, N. Yuvaraj, S. Aravindan, and Vipin, “Enhancement of Mechanical Properties of 6061/6082 Dissimilar Aluminium Alloys Through Ultrasonic-Assisted Cold Metal Transfer Welding,” Arab. J. Sci. Eng., vol. 46, no. 12, pp. 12089–12104, 2021.
  9. Balasubramanian, M. V. Choudary, A. Nagaraja, and K. O. C. Sai, “Cold metal transfer process-A review,” Mater. Today Proc., vol. 33, pp. 543–549, 2020.
  10. Çömez and H. Durmuş, “Corrosion behavior and mechanical properties of cold metal transfer welded dissimilar AA7075-AA5754 alloys,” J. Cent. South Univ., vol. 27, no. 1, pp. 18–26, 2020.
  11. Selvi, A. Vishvaksenan, and E. Rajasekar, “Cold metal transfer (CMT) technology-An overview,” Def. Technol., vol. 14, no. 1, pp. 28–44, 2018.
  12. Peng., H. Liu, Y. Liang, W. Xu, Y. Zhao, S. Chen, J. Weng, and J. Yang, “CMT welding-brazing of al/steel dissimilar materials using cycle-step mode,” J. Mater. Res. Technol., vol. 18, pp. 1267–1280, 2022.
  13. Xu, H. He, Y. Yi, H. Wang, C. Yu, and W. Fang, “Dissimilar joining of stainless steel and aluminum using twin-wire CMT,” Weld. World, vol. 65, no. 8, pp. 1541–1551, 2021.
  14. Singh, K. S. Arora, and D. K. Shukla, “Joining of Dissimilar Materials—Aluminium to Steel—Using CMT + P Weld-Brazing Process,” Lect. Notes Multidiscip. Ind. Eng., vol. Part F255, pp. 271–284, 2020.
  15. Balamurugan*, R. Ramamoorthi, I. K. K. Jeysing, S. Kumar, I. M. Sharukhan, G. M. Prakash, and S. Madhan, “Microstructure and Mechanical Properties of Cold Metal Transfer Welding AA6082-T4 Alloys,” Indian J. Sci. Technol., vol. 12, no. 42, pp. 1–8, 2019.
  16. Venukumar, M. Cheepu, T. Vijayababu, and D. Venkateswarlu, “Cold metal transfer (Cmt) welding of dissimilar materials: An overview,” Mater. Sci. Forum, vol. 969 MSF, pp. 685–690, 2019.
  17. Husain Mehdi, Sumit Jain, Msomi, V. et al. Effect of Intermetallic Compounds on Mechanical and Microstructural Properties of Dissimilar Alloys Al-7Si/AZ91D. J. of Materi Eng and Perform (2023). https://doi.org/10.1007/s11665-023-08302-9.
  18. Cao, B. F. Wen, J. H. Chen, and P. C. Wang, “Cold Metal Transfer joining of magnesium AZ31B-to-aluminum A6061-T6,” Mater. Sci. Eng. A, vol. 560, pp. 256–266, 2013.
  19. Madhavan, M. Kamaraj, and L. Vijayaraghavan, “Cold metal transfer welding of aluminium to magnesium: Microstructure and mechanical properties,” Sci. Technol. Weld. Join., vol. 21, no. 4, pp. 310–316, 2016.
  20. Elrefaey, “Effectiveness of cold metal transfer process for welding 7075 aluminium alloys,” Sci. Technol. Weld. Join., vol. 20, no. 4, pp. 280–285, 2015.
  21. Shang, K. Wang, Q. Zhou, D. Zhang, J. Huang, and G. Li, “Microstructure characteristics and properties of Mg/Al dissimilar metals made by cold metal transfer welding with ER4043 filler metal,” Xiyou Jinshu Cailiao Yu Gongcheng/Rare Met. Mater. Eng., vol. 42, no. 7, pp. 1337–1341, 2013.
  22. Babu, S. K. Panigrahi, G. D. Janaki Ram, P. V. Venkitakrishnan, and R. Suresh Kumar, “Cold metal transfer welding of aluminium alloy AA 2219 to austenitic stainless steel AISI 321,” J. Mater. Process. Technol., vol. 266, pp. 155–164, 2019.
  23. G. Pickin and K. Young, “Evaluation of cold metal transfer (CMT) process for welding aluminium alloy,” Sci. Technol. Weld. Join., vol. 11, no. 5, pp. 583–585, 2006.
  24. Yang, J. Zhang, J. Lian, and Y. Lei, “Welding of aluminum alloy to zinc coated steel by cold metal transfer,” Mater. Des., vol. 49, pp. 602–612, 2013.
  25. Gungor, E. Kaluc, E. Taban, and A. SIK Ş.Ş, “Mechanical and microstructural properties of robotic Cold Metal Transfer (CMT) welded 5083-H111 and 6082-T651 aluminum alloys,” Mater. Des., vol. 54, pp. 207–211, 2014.
  26. P. Zapico, A. H. A. Lutey, A. Ascari, C. R. Gómez Pérez, E. Liverani, and A. Fortunato, “An improved model for cold metal transfer welding of aluminium alloys,” J. Therm. Anal. Calorim., vol. 131, no. 3, pp. 3003–3009, 2018.
  27. Cao, G. Yu, J. H. Chen, and P. C. Wang, “Cold metal transfer joining aluminum alloys-to-galvanized mild steel,” J. Mater. Process. Technol., vol. 213, no. 10, pp. 1753–1763, 2013.
  28. Huang, H. Dong, Y. Ma, P. Li, J. Wang, J. Yang, and B. Wu, “Interfacial layer regulation and its effect on mechanical properties of Ti6Al4V titanium alloy and T2 copper dissimilar joints by cold metal transfer welding,” J. Manuf. Process., vol. 75, pp. 1100–1110, 2022.
  29. Li, S. Xu, X. Lu, X. Zhu, Y. Guo, and J. Song, “Effect of welding speed on microstructure and mechanical properties of titanium alloy/stainless steel lap joints during cold metal transfer method,” Metall. Res. Technol., vol. 117, no. 5, 2020.
  30. Chang, R. Cao, and Y. Yan, “The joining behavior of titanium and Q235 steel joined by cold metal transfer joining technology,” Materials (Basel)., vol. 12, no. 15, 2019.
  31. Cao, Z. Feng, and J. H. Chen, “Microstructures and properties of titanium-copper lap welded joints by cold metal transfer technology,” Mater. Des., vol. 53, pp. 192–201, 2014.
  32. Feng, Y. Liu, Q. Sun, J. Liu, and L. Wu, “Microstructures and Properties of Aluminum-Copper Lap-Welded Joints by Cold Metal Transfer Technology,” Adv. Eng. Mater., vol. 17, no. 10, pp. 1480–1485, 2015.

nn[/if 1104][if 1104 not_equal=””]n

    [foreach 1102]n t

  1. [if 1106 equals=””], [/if 1106][if 1106 not_equal=””],[/if 1106]

    2. n[/foreach]

n[/if 1104]

nn

nn[if 1114 equals=”Yes”]n

n[/if 1114]

n

n

[if 424 not_equal=””][else]Ahead of Print[/if 424] Open Access Original Research

n

n

n

n

n

Journal of Polymer and Composites

n

[if 344 not_equal=””]ISSN: 2321–2810[/if 344]

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

n

Volume
[if 424 equals=”Regular Issue”]Issue[/if 424][if 424 equals=”Special Issue”]Special Issue[/if 424] [if 424 equals=”Conference”][/if 424]
Received October 30, 2023
Accepted December 23, 2023
Published

n

n

Views: 29

n

n

n

nn function myFunction2() {n var x = document.getElementById(“browsefigure”);n if (x.style.display === “block”) {n x.style.display = “none”;n }n else { x.style.display = “Block”; }n }n document.querySelector(“.prevBtn”).addEventListener(“click”, () => {n changeSlides(-1);n });n document.querySelector(“.nextBtn”).addEventListener(“click”, () => {n changeSlides(1);n });n var slideIndex = 1;n showSlides(slideIndex);n function changeSlides(n) {n showSlides((slideIndex += n));n }n function currentSlide(n) {n showSlides((slideIndex = n));n }n function showSlides(n) {n var i;n var slides = document.getElementsByClassName(“Slide”);n var dots = document.getElementsByClassName(“Navdot”);n if (n > slides.length) { slideIndex = 1; }n if (n (item.style.display = “none”));n Array.from(dots).forEach(n item => (item.className = item.className.replace(” selected”, “”))n );n slides[slideIndex – 1].style.display = “block”;n dots[slideIndex – 1].className += ” selected”;n }n”}]