Continuous-Time Modelling of the Two-Input Fourth Order DC_DC Converter

Open Access

Year : 2021 | Volume : | Issue : 3 | Page : 1-9
By

    B. Amarendra Reddy

  1. P. Vamsi Krishna

  1. Assistant Professor, A.U. College of Engineering (A), Andhra University, Visakhapatnam, India
  2. M. Tech Scholar, A.U. College of Engineering (A), Andhra University, Visakhapatnam, India

Abstract

Two-input fourth-order integrated (TIFOI) converter is designed to process the power from two different sources Vg1 and Vg2. This converter facilitates regulation of dc-bus voltage and LVS current. In the power conversion process it performs bucking operation for first dc source Vg1, buck-boost operation for the second source Vg2. Power stage dynamics of the TIFOI converters is modeled using the state-space analysis. The system modelling plays an important role in the design and implementation of the integrated converter control systems. The TFM of an integrated converter can be obtained mainly in two ways as these are widely used and accepted methodologies. These are (i) small signal continuous-time model and (ii) small-signal discrete-time models. These modelling methodologies were reported in literature for single-input dc-dc converters, but their application in the two-input dc-dc converters has not been exhaustively addressed yet. The transfer function matrix (TFM) of the TIFOI converter are obtained using small-signal continuous-time model and the detailed mathematical aspects are presented in this paper. Using this TFM of the TIFOI dc-dc converter is obtained.

Keywords: Photo voltaic, State-space averaged models, fixed-frequency PWM control signal, duty ratio control signals, State Space Matrix, small signal model, equilibrium point, converter dynamics.

[This article belongs to Journal of Control & Instrumentation(joci)]

How to cite this article: B. Amarendra Reddy, P. Vamsi Krishna Continuous-Time Modelling of the Two-Input Fourth Order DC_DC Converter joci 2021; 12:1-9
How to cite this URL: B. Amarendra Reddy, P. Vamsi Krishna Continuous-Time Modelling of the Two-Input Fourth Order DC_DC Converter joci 2021 {cited 2021 Nov 25};12:1-9. Available from: https://journals.stmjournals.com/joci/article=2021/view=90598

Full Text PDF Download

Browse Figures

References

1. G. W. Wester and R. D. Middlebrook. “Low-frequency characterization of switched dc-dc converters”. IEEE Transactions on Aerospace and Electronic System. May 1973 ; AES- 9(3): 376- 85.
2. R. D. Middlebrook and S. Cuk, “A general unified approach to modelling switching-converter power stages”. IEEE Power Electronics Specialists Conference, PESC1976; 8-10 June 1976; Cleveland, OH, USA. US: IEEE Press; 2015. 18-34p.
3. F. Huliehel and S. Ben-Yaakov. “Low-frequency sampled-data models of switched mode DC-DC converters”. IEEE Transactions on Power Electronics. January 1991; 6(1): 55-61.
4. D. E. Van, J. N. Spruijt, D. M. O’sullivan, and J. B. Klaassens. “PWM-switch modeling of DC-DC converters,” IEEE Transactions on Power Electronics. November 1995. 10(6): 659-65.
5. D.Maksimovic, A.M.Stankovic, V.J.Thottuvelil, G.C.Verghese. “Modeling and simulation of power electronic converters”. Proceedings of the IEEE. June 2001; 89(6): 898-912.
6. B. Johansson. “DC-DC converters-dynamic model design and experimental verification”. PhD Thesis, Lund University, 2005.
7. D. Maksimovic and R. Zane, “Small-Signal Discrete Time Modeling of Digitally Controlled PWM Converters,” IEEE Transactions on Power Electronics. June 2007; 22(6): 2552-2556.
8. M. Veerachary, K. K. Sawant., “Control of multi-input integrated buck-boost converter”. IEEE Region 10 & the Third International Conference on Industrial & Information Systems, ICIIS2008; 8-10 Dec. 2008; Kharagpur, India. US: IEEE Press; 2009. 1-6 p.
9. M. Veerachary, “Multi-input integrated buck-boost converter for photovoltaic applications”. IEEE International Conference on Sustainable Energy Technologies, ICSET2008; 24-27 Nov. 2008; US: IEEE Press; 2008. 546-551 p.
10. M.Veerachary, R.N.Gowra, and D.Ganta. “Discrete-time modeling of multi-state dc-dc converters”. Joint International Conference on Power Electronics, Drives & Energy Systems & 2010 Power India PEDES & Power India, 20-23 December 2010; New Delhi, India. 2011, 1-6 pp.
11. H. Behjati and A. Davoudi.“Discrete-time modelling of digitally-controlled multiphase converters”. Electronics letters. February 2011; 47(4): 280-281.
12. M. Veerachary, “Two-loop controlled buck–SEPIC converter for input source power management”. IEEE Transactions on Industrial Electronics. November 2012; 59(11): 4075-4087.
13. M. Veerachary, B. A. Reddy, and E. V. Kumar, “Two-input dc-dc converter for DC-Grid applications”. IEEE fifth Power India Conference, PIICON2012, 19-22 Dec. 2012; Murthal, India. US: IEEE Press; 1-6 p.
14. M.Veerachary, M.M.Mohan, and B.A.Reddy, “Centralized digital controller for two-input integrated dc-dc converter,” IEEE 10th International Conference on Power Electronics & Drives Systems , PEDS2013; 22-25 April 2013; Kitakyushu, Japan. US: IEEE Press; 244-249 pp.
15. B. A. Reddy and M. Veerachary, “”Gramian based digital controller design for two-input integrated dc-dc converter,”” International Conference on Control Communication & Computing, ICCC2013; 13-15 Dec. 2013; Thiruvananthapuram, India. US: IEEE Press; .335-340 p.
16. B. A. Reddy and M. Veerachary, “Hankel – norm based interaction analysis and digital controller design for two-input integrated dc-dc converter”. Annual IEEE India Conference, INDICON2013, 1-6 pp.
17. B.A. Reddy and M.Veerachary, “Participation matrix based interaction analysis and controller design for two-input dc-dc converter,” International Conference on Advances in Energy Conversion Technologies, ICAECT2014, 23-25 Jan. 2014; Manipal, India. US: IEEE Press; 158-163 p.
18. B. Amarendra Reddy and M. Veerachary, “Robust Multivariable Controller Design Using H- infinity loop shaping for TIFOI DC-DC Converter”. IEEE Uttar Pradesh Section International Conference on Electrical, Computer & Electronics Engineering, UPCON2016, 9-11 December 2016; Varanasi, India.US: IEEE Press 2017; 372-377 p .
19. H. Yang, J. Qin, S. Debnath, and M. Saeedifard. “Phasor domain steady-state modeling and design of the DC–DC modular multilevel converter,” IEEE Transactions on Power Delivery. October 2016; 31(5): 2054-2063.”


Regular Issue Open Access Article
Volume 12
Issue 3
Received November 8, 2021
Accepted November 11, 2021
Published November 25, 2021