[{“box”:0,”content”:”
n
n
- n t
n
S. A. Ladkat, Dnyanesh R. Kende, Adesh S. Gore, Aditya S. Gosavi, Athrava R. Gulave
[/foreach]
n
n
n
- [foreach 286] [if 1175 not_equal=””]n t
- Assistant Professor, Student, Student, Student, Student, Department of Mechanical Engineering, NBNSTIC, Department of Mechanical Engineering, NBNSTIC, Department of Mechanical Engineering, NBNSTIC, Department of Mechanical Engineering, NBNSTIC, Department of Mechanical Engineering, NBNSTIC, Maharashtra, Maharashtra, Maharashtra, Maharashtra, Maharashtra, India, India, India, India, India
n[/if 1175][/foreach]
n
Abstract
nThe ingenuity can be found in its simple construction, sparse use of pricey components, extremely low upkeep and repair costs, accessibility to all segments of society, and lack of environmental impact. According to the environmental issue, it is essential to use energy in alternative ways in order to conserve it. The PPWM additionally conserves time, water in a container and power while being reasonably priced. The leg-powered washing machine (PPWM) is a fantastic invention all of it’s own; it evolved specifically to be used for washing clothes by pressing a pedal.. PPWM is made of easily & readily available scrap components of washing machine & bicycle, In PPWM bicycle assembly is used as frame & power transmission unit and this assembly is welded to a prefabricated assembly of washing machine drum which also consists of bevel gear mesh arrangement. It is an equipment that transfers human peddling action into the rotational motion of the wheel; the present project is an attempt for a concept for a fabric washing machine that can match the criteria. Despite the machine’s driving motor differs in comparison to that of other akin machines, this concept’s basic principle is identical as well. In the moment’s effort, given the job’s limits, the goal of minimising the starting cost and running cost of machine washing is virtually realized. The primary objective is to minimize the amount of labor required to give light washing in isolated, gloomy places that are far from construction and power.
n
Keywords: Pedal powered washing machine (PPWM), Pedal, Chain, Bevel Gear, Sustainable
n[if 424 equals=”Regular Issue”][This article belongs to International Journal of Manufacturing and Production Engineering(ijmpe)]
n
n
n
n
n
nn
nn[if 992 equals=”Open Access”] Full Text PDF[else] nvar fieldValue = “[user_role]”;nif (fieldValue == ‘indexingbodies’) {n document.write(‘Full Text PDF‘);n }nelse if (fieldValue == ‘administrator’) { document.write(‘Full Text PDF‘); }nelse if (fieldValue == ‘ijmpe’) { document.write(‘Full Text PDF‘); }n else { document.write(‘ ‘); }n [/if 992] [if 379 not_equal=””]nn
Browse Figures
n
n[/if 379]n
References
n[if 1104 equals=””]n
- S. Khurmi “Design of Machine Elements”. Eurasia publishing house 3 Pvt Ltd, 14th revised edition.
- Nitinchandra R. Patel, Mohammed A. Vasanwala, Balkrushna B. Jani, Miteshkumar D. Rathwa & Ravi A. Thakkar “Material selection and testing of hacksaw blade based on mechanical properties international journal of innovative research in science, engineering and technologyvol. 2, issue 6. June 2013.
- M.Moghe & K.S.Zakiuddin (2013) “Design and Development of Turmeric Polishing Machine Energized.
- By Human Power Flywheel Motor.”-A past review, Proceedings of the 1st International and 16th National.
- Conference on Machines and Mechanisms IIT Roorkee, India, Dec 18-20 2013.
- Bicilavadora: The Pedal-Powered Washing Machine – IDEAS 2005 Proposal.
- Bruzzone, M. & Wieler. A. (2010) “Reflecting on an Intercultural Design-Build Project in the Kathmandu Valley” Final Draft, February 5, 2010.
- David Gordon Wilson “UNDERSTANDING PEDAL POWER” ISBN: 0-86619-268-9 [C] 1986, Volunteers in Technical Assistance” Technical paper 51 VITA 1600 Wilson Boulevard USA.
- EJ Yerxa Taylor & Francis “Occupational science: A new source of power for participants in occupational therapy‟- Journal of Occupational Science ISSN 1442-7591 Volume: 13, Issue: 1, April 1993 pp254-259.
- Vijay Talodhikar, P A Potdukhe A. Duldule, A Walde and S Chahande (2022). A Performance Evaluation of MOPPM by Simulating ANN based model. A Mathematical Approach, International Journal of Mechanical Engineering, 7(5), 428-437
- M A Fajobi, E Y Salawu, et al (2020). Development of a human powered pedal washing machine, 6th International Conference on Advanced Engineering and Technology (ICAET 2019), (pp. 1-7). IOP Publishing, Available at: https://iopscience.iop.org/article/10.1088/17 57-899X/811/1/012035/pdf.
- S.M. Moghe (2013). Design & development of turmeric polishing machine energized by human power flywheel motor, International Journal of Innovative Technology and Research, 1(6), Available at: http://www.ijitr.com/index.php/ojs/article/view/226
nn[/if 1104][if 1104 not_equal=””]n
- [foreach 1102]n t
- [if 1106 equals=””], [/if 1106][if 1106 not_equal=””],[/if 1106]
n[/foreach]
n[/if 1104]
nn
nn[if 1114 equals=”Yes”]n
n[/if 1114]
n
n
n
International Journal of Manufacturing and Production Engineering
n
n
n
n
n
n
| Volume | 01 |
| Issue | 01 |
| Received | June 29, 2023 |
| Accepted | July 12, 2023 |
| Published | November 29, 2023 |
n
n
n
n
n[/foreach]
n[/if 1190] [if 1177 not_equal=””]n
n
n[/foreach]
n[/if 1177]
n
n
n
n function myFunction2() {n var x = document.getElementById(“browsefigure”);n if (x.style.display === “block”) {n x.style.display = “none”;n }n else { x.style.display = “Block”; }n }n document.querySelector(“.prevBtn”).addEventListener(“click”, () => {n changeSlides(-1);n });n document.querySelector(“.nextBtn”).addEventListener(“click”, () => {n changeSlides(1);n });n var slideIndex = 1;n showSlides(slideIndex);n function changeSlides(n) {n showSlides((slideIndex += n));n }n function currentSlide(n) {n showSlides((slideIndex = n));n }n function showSlides(n) {n var i;n var slides = document.getElementsByClassName(“Slide”);n var dots = document.getElementsByClassName(“Navdot”);n if (n > slides.length) { slideIndex = 1; }n if (n (item.style.display = “none”));n Array.from(dots).forEach(n item => (item.className = item.className.replace(” selected”, “”))n );n slides[slideIndex – 1].style.display = “block”;n dots[slideIndex – 1].className += ” selected”;n }n n function myfun() {n x = document.getElementById(“editor”);n y = document.getElementById(“down”);n z = document.getElementById(“up”);n if (x.style.display == “none”) {n x.style.display = “block”;n }n else {n x.style.display = “none”;n }n if (y.style.display == “none”) {n y.style.display = “block”;n }n else {n y.style.display = “none”;n }n if (z.style.display == “none”) {n z.style.display = “block”;n }n else {n z.style.display = “none”;n }n }n function myfun2() {n x = document.getElementById(“reviewer”);n y = document.getElementById(“down2”);n z = document.getElementById(“up2”);n if (x.style.display == “none”) {n x.style.display = “block”;n }n else {n x.style.display = “none”;n }n if (y.style.display == “none”) {n y.style.display = “block”;n }n else {n y.style.display = “none”;n }n if (z.style.display == “none”) {n z.style.display = “block”;n }n else {n z.style.display = “none”;n }n }n”}]