Open Access
Ahmad Faraz
- Student Ashoka Institute of Technology and Management Uttar Pradesh India
Abstract
The features of the oxide layer scale that forms on the metal’s surface and limits gas penetration into the metal, limiting the growth of gaseous corrosion, influence a metal’s or alloy’s oxidation resistance in an oxidizing atmosphere. The rise in weight of sample being tested (due to oxygen uptake by the metal) or even the weight loss after removing the scale from the sample’s surface, related to a unit surface and the time of the experiment are the quantitative aspects of oxidation resistance. The surface state of the sample or component is taken into account at the same time; this may vary subjectively even though its quantitative qualities are the same. Oxidation resistance, like heat resistance, is a basic requirement for a material’s fitness for high-temperature use. For many applications, strong oxidizing resistance of hard composite coatings is just as crucial as thermal stability. The chemical nature of the film has a significant impact on its high-T oxidation resistance. The creation of a persistent, passive, void-free oxide layer on the film’s surface is a very effective method for improving high-T oxidation resistance. As a result, films with components that quickly produce oxides and stabilize amorphous phases have greater oxidation resistance. Recent experiments indicate that the value of Si in a film has a significant impact on its high-temperature oxidation durability. The structure of films has a significant impact on oxidation resistance. It is generally known that films with a little amount of additional components (less than 5%) have a well- developed columnar microstructure. These films have holes between columns that connect the film’s surface to the substrate directly. As a result, these films have a poorer oxidation resistance and significantly thicker oxide layers than films with a higher added element content.
Keywords: Corrosion, metal surface, oxide layer, surface, reduction
References
1. Gray JE, Luan B. Protective coatings on magnesium and its alloys—A critical review. Journal of Alloys and Compounds. Apr 2002; 336(1–2): 88–113.
2. Grundmeier G, Reinartz C, Rohwerder M, Stratmann M. Corrosion properties of chemically modified metal surfaces. Electrochimica Acta. 1998; 43(1–2): 165–174.
3. Zhang YB, Tan YW, Stormer HL, Kim P. Experimental observation of the quantum hall effect and Berry’s phase in graphene. Nature. 2005; 438(7065): 201–204.
4. Bose S. High temperature coatings. Butterworth-Heinemann Publications; 2011.
5. Sadeghi E, Markocsan N, Joshi S. Advances in corrosion-resistant thermal spray coatings for renewable energy power plants. Part I: Effect of composition and microstructure. Journal of Thermal Spray Technology. Dec 2019; 28(8): 1749–1788.
6. Fu Y, Wei J, Batchelor AW. Some considerations on the mitigation of fretting damage by the application of surface-modification technologies. Journal of Materials Processing Technology. Mar 2000; 99(1–3): 231–245.
7. Taylor CD, Tossey BM. High temperature oxidation of corrosion resistant alloys from machine learning. npj Materials Degradation. Jul 2021; 5(1): 1–0.
8. Rebak RL, Crook P. Influence of the environment on the general corrosion rate of alloy 22 (N06022). ASME Pressure Vessels and Piping Conference 2004 Jan 1 (Vol. 46784, pp. 131–136).
9. Wellman RG, Nicholls JR. High temperature erosion-oxidation mechanisms, maps and models. Wear. May 2004; 256(9–10): 907–917.
10. Kofstad P, Lillerud KP. On high temperature oxidation of chromium: II. Properties of and the oxidation mechanism of chromium. Journal of the Electrochemical Society. Nov 1980; 127(11): 2410.
11. Shoemaker LE, Crum JR, Muro RA. Advanced super-austenitic stainless steel an economical alternative to nickel-base corrosion-resistant alloys. In corrosion 2009 2009 Mar. One Petro.
International Journal of Metallurgy and Alloys
| Volume | |
| Received | April 5, 2022 |
| Accepted | May 15, 2022 |
| Published | January 15, 2023 |