Analysis of Buck-Boost DC-DC Converter Controlled SPRS Using PWMVSI with Voltage and Current Control Techniques

Open Access

Year : 2022 | Volume : | Issue : 1 | Page : 8-22
By

    Sita Ram Bhardwaj

  1. Y.R. Sood

  2. O.P. Rah

  3. Veena Sharma

  1. Assistant Professor, Government Hydro Engineering College, Bilaspur, Himachal Pradesh, India
  2. Vice Chancellor, Japyee University, Noida, Uttar Pradesh, India
  3. Associate Professor, National Institute of Technology, Hamirpur, Himachal Pradesh, India
  4. Associate Professor, National Institute of Technology, Hamirpur, Himachal Pradesh, India

Abstract

Slip power recovery scheme (SPRS) employing semiconductor technology has a considerable role in the progress of variable speed slip ring induction motor drive (SRIMD). SPRS utilizing the various configurations of pulse width modulated (PWM) inverters are current source inverters, voltage source inverters (VSI) with voltage and current control techniques, while the choppers are buck, boost, and buck-boost configurations. The PWMVSI with chopper controller allows the reactive power and speed control simultaneously, therefore achieves the decoupled control of SRIM. This study presents the analysis of SPRS based SRIMD employing PWMVSI with voltage and current control techniques in combination with buck-boost DC-DC converter using MOSFET semiconductor devices. In the voltage control technique, the power is returned back to supply through reactor while in the PWMVSI using current control technique, the power is feedback to the supply through reactor and step-up transformer. The goal of voltage and current control techniques is to decrease the reactive power requirement of inverter from the supply, as a result of THD of supply current, and improve the power factor as well as efficiency of SRIMD. The simulation model of 2 HP motor has been developed in the Simulink to analyze the performance characteristics of SRIMD. From the simulation results it has been established the SPRS using buck-boost DC-DC and PWMVSI employing voltage and current control techniques have improved the power factor and efficiency as well as reduced the reactive power consumption of inverter, therefore THD of supply compared to SPRS without DC-Dc converter.

Keywords: Buck-boost chopper, inverter, slip power recovery scheme, slip ring induction motor drive, voltage control technique, current control technique

[This article belongs to International Journal of Electrical Power System and Technology(ijepst)]

How to cite this article: Sita Ram Bhardwaj, Y.R. Sood, O.P. Rah, Veena Sharma Analysis of Buck-Boost DC-DC Converter Controlled SPRS Using PWMVSI with Voltage and Current Control Techniques ijepst 2022; 8:8-22
How to cite this URL: Sita Ram Bhardwaj, Y.R. Sood, O.P. Rah, Veena Sharma Analysis of Buck-Boost DC-DC Converter Controlled SPRS Using PWMVSI with Voltage and Current Control Techniques ijepst 2022 {cited 2022 Jul 25};8:8-22. Available from: https://journals.stmjournals.com/ijepst/article=2022/view=90563

Full Text PDF Download

Browse Figures

References

1. Lavi A, Polge RJ. Induction motor speed control with static inverter in the rotor. IEEE Trans Power Appar Syst. 1966 Jan; PAS-85(1): 76–84.
2. Kumar A, Aggarwal SK, Saini LM, et al. Performance analysis of a microcontroller based slip power recovery drive. Int J Eng Technol. 2011; 3(3): 25–35.
3. Yang X, Xi L, Yang X, Jian-guo J. Research on the application of PFC technology in cascade speed control system. 2008 3rd IEEE Conference on Industrial Electronics and Applications ICIEA. 2008 Jun 03–05; Singapore. US: IEEE Press; 2008.
4. Rahi OP, Chandel AK. Refurbishment and Uprating of Hydro Power Plants-A Literature Review. Renew Sustain Energy Rev. 2015 Aug; 48: 726–737.
5. Rahi OP, Kumar A. Economic Analysis for Refurbishment and Uprating of Hydro Power Plants. Renew Energy. 2016; 86: 1197–1204.
6. Shepherd W, Stanway J. Slip power recovery in an induction motor by the use of a thyristor inverter. IEEE Trans Ind Gen Appl. 1969; IGA-5(1): 74–82.
7. Sita Ram, Rahi OP, Sharma V. A comprehensive literature review on slip power recovery drives. Renew Sustain Energy Rev. 2017 Jun; 73: 922–934.
8. Shepherd W, Khalil AQ. Capacitive compensation of thyristor controlled slip-energy recovery system. Inst Electr Eng. 1970 May; 117(5): 948–956.
9. Taniguchi K, Takeda Y, Hirasa T. High-performance slip-power recovery induction motor. IEE Proceedings B (Electr Power Appl). 1987 Jul; 134(4): 193–198.
10. Mishra AK, Wahi AK. Performance analysis and simulation of inverter fed slip -power recovery drive. IE (I) Journal-EL. 2004; 85: 89–95.
11. Pilley P, Refoufi L. Calculation of slip energy recovery induction motor drive behavior using the equivalent circuit. IEEE Trans Ind Appl. 1994 Jan–Feb; 30(1): 154–163.
12. Marques GD, Verdelho P. A simple slip-power recovery system with a dc voltage intermediate circuit and reduced harmonics on the mains. IEEE Trans Ind Electron. 2000 Feb; 47(1): 123–132.
13. Tunyasrirut S, Ngamwiwit J, Furuya T, Yamamoto Y. Fuzzy logic controlled inverter-chopper for high performance of slip energy recovery system. Proceedings of the 41st SICE Annual Conference. SICE 2002. 2002 Aug 05–07; Osaka, Japan. US: IEEE Press; 2003.
14. Tunyasrirut S, Kinnares V, Ngamwiwit J. Performance improvement of slip energy recovery system by a voltage controlled technique. Renew Energy. 2010 Oct; 35(10): 2235–2242.
15. Tunyasrirut S, Kinnares V. Speed and power control of a slip energy recovery drive using voltage-source PWM converter with current controlled technique. Energy Procedia. 2013; 34: 326–340.
16. Panda D, Benedict EL, Venkataramanan G, et al. A novel control strategy for the rotor side control of a doubly-fed induction machine. Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual meeting. 2001 Sep 30–2001 Oct 04. Chicago, IL, USA. US: IEEE Press.
17. Pardhi C, Yadavalli A, Sharma S, and Kumar GA. A study of slip-power recovery schemes with a buck dc Voltage intermediate circuit and reduced harmonics on the mains by various PWM techniques. International Conference on Computation of Power, Energy, Information and Communication. 2014.
18. Sita Ram, Rahi OP, Sharma V. Analysis of induction motor drive using buck-boost controlled slip power recovery scheme. 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy System. 2016 Jul 04–06; DTU, Delhi, India. US: IEEE Press; 2016; 1985–1990.
19. Sita Ram, Rahi OP, Sharma V, et al. Analysis of induction motor drive using SPRS based on GTO/IGBT buck-boost chopper topologies. 2016 7th IEEE India International Conference on Power Electronics. (IICPE), 2016 Nov 17–19; Patiala, India. US: IEEE Press; 2017; 1–6.
20. Sita Ram, Rahi OP, Sharma V, et al. Reactive power control of induction motor drive using chopper operated slip power recovery scheme. 2016 IEEE 7th Power India International. Conference (PIICON). 2016 Nov 25–27; Government Engineering College, Bikaner Rajasthan. US: IEEE Press; 2017; 1–6.
21. Bhardwaj SR, Rahi OP, Sharma V. Comparative Analysis of Induction Motor Drive with Chopper Controlled SPRS Employing Various Inverter Configurations. IETE J Res. 2019; 65(3): 329–341.
22. Bhardwaj SR, Rahi OP, Sharma V. Performance Analysis of SPRS based Induction Motor Drive using Multi-level Inverter and Buck-Boost Chopper. Int J Power Electron. 2020; 12(1): 85–100.
23. Rashid MH. Power Electronics Handbook Devices, Circuits, and Applications. 3rd Edn. Library of Congress Cataloging-in-Publication Data; 2010.
24. Prasannakumar K, Das BB. Digital combination of buck and boost converters to control a positive buck-boost converter and improve output transients. Int J Mag Eng Technol Manag Res. 2014; 1(9): 50–56.
25. Michael Green. Application Report. Design Calculation for Buck-Boost Converters. Texas Instruments Literature Number SLVA535A. 2012 Aug–Sep; 1–12.
26. Everett Rogers. Application Report. Understanding Buck-Boost Power Stages in Switch Mode Power Supplies. Texas Instruments Literature Number SLVA05, 1999; 1–32.


Regular Issue Open Access Article
Volume 8
Issue 1
Received June 21, 2022
Accepted July 5, 2022
Published July 25, 2022