Open Access
Alaskhanov A.K.
Chernysheva N.V.
Saydumov M.S.
Khrunyk Y.Y.
Murtazaeva T.S.A.
- Associate Professor Grozny State Oil Teсhniсal University named after Academician M.D. Millionshchikov, Isaev Prospect 100, 364051, Grozny Chechen Republic Russia
- Associate Professor Belgorod State Technological University named after V.G. Shukhov, Kostyukov Str. 46, 308012 Belgorod Russia
- Associate Professor Grozny State Oil Teсhniсal University named after Academician M.D. Millionshchikov, Isaev Prospect 100, 364051, Grozny Chechen Republic Russia
- Associate Professor M.N. Mikheev Institute of Metal Physics of the Ural Branch of the Russian Academy of Sciences, Sofia Kovalevskaya Str. 18, 620219 Yekaterinburg Yekaterinburg Russia
- Associate Professor Kh. Ibragimov Complex Institute of the Russian Academy of Sciences, Staropromyslovsky avenue 21A, 364051, Grozny Chechen Republic Russia
Abstract
This paper presents the results of the research and development of composite gypsum binders (CGB) based on technogenic raw materials in the form of ash and slag mixtures of fuel wastes, which reduces the consumption of Portland cement clinker up to 85% in comparison with traditional composite binders. The optimal compositions of the CGB are proposed. The impact of the type of mineral additives of technogenic origin and superplasticizer on the technological and physicomechanical properties of the solution and stone based on the CGB is studied. This paper presents the results of the research and development of composite gypsum binders (CGB)
Keywords: Technogenic raw materials, Fly ash, Slag, Mineral additives, Composite gypsum binders, Water resistance of gypsum binders, Replacement of Portland cement, Environment
References
1. Dvorkin, L.I. (1991). Cement concretes with mineral fillers (L.I. Dvorkin, V.N. Solomatov, V.N. Vyrovoy, & S.N. Chudnovsky (Eds.)). Budivelnik.
2. Ferronskaya, A.V., Korovyakov, V.F., & Kaleev, I.P. (1988). Improving the quality of gypsum concrete through the use of chemical additives. In Annotated list of scientific and technical developments of Moscow universities proposed for implementation in the practice of construction (pp. 6–7). Association of Construction Universities.
3. Kalashnikov, V.I. (2000). Modern views on the use of finely ground cements and VNV in concrete. Building Materials, 7, 12–13.
4. Korovyakov, V.F. (2002). Improving the efficiency of gypsum binders and concrete based on them. Moscow State University of Civil Engineering.
5. Chomaev, M.N., & Bayramkulova, B.O. (2016). Geoecological aspects of the functioning of cement production. Izvestiya of the Dagestan State University, 10(3), 124–129.
6. GOST 31108-2016 Cement for general construction. Technical specifications. (2017). Moscow Standartinform. https://www.russiangost.com/p-242397-gost-31108-2016.aspx
7. S.A.Y., & Ismailova, Z.K. (2008). The use of local industrial waste in fine-grained concrete. Building Materials, 3, 57.
8. Murtazaev, S.A.Y. (2009). Effective concrete and mortar based on technogenic raw materials for repairment and construction works. Grozny State Oil Technical University named after academician M.D. Millionshchikov.
9. Bazhenov, Y.M. (2011). Fine-grained concrete from technogenic raw materials for repairment and restoration of damaged buildings and structures (Y.M. Bazhenov, D.K.-S. Bataev, & S.A.Y. Murtazaev (Eds.)). Publishing and Printing Complex Grozny Worker.
10. Ismailova, Z.K. (2019). Obtaining of the clinker-free binders by synthesis of alkaline solutions of sodium silicate from silica-containing rocks. In Z.K. Ismailova, M.S. Salamanova, S.A.Y. Murtazaev, & R.G. Bisultanov (Eds.), Bulletin of the Dagestan State Technical University. Technical Science. No. 3 (pp. 149–158).
11. Salamanova, M.S. (2020). Possible ways of alternative problem solving in the cement industry. Building Materials, 1–2, 73–77
12. Autoni, M. (2011). Investigation of cement substitution by combined addition of calcined clays and limestone. In M. Autoni, I. Rossen, K. Serivencr, R. Castello, A. Alujas Diaz, & I.F. Martinelia (Eds.), Cementing a sustainable future. XIII ICCC International Congress of the Chemistry of Cement. Abstracts and Proceedings (p. 96). ICCC Madrid.
13. Chernysheva, N.V. (2019). Effective cellular concrete on a composite gypsum binder. In S.V. Shatalova, N.V. Chernysheva, E.S. Glagolev, E.N. Lesnichenko, & M.Y. Drebezgova (Eds.), Bulletin of the Belgorod State Technological University named after V.G. Shukhov No. 10 (pp. 11–18). Publishing House of the Belgorod State Technological University named after Shukhov V.G.
14. Fischer, H.B. (2015). Recrystallization of gypsum particles. In H.B. Fischer, H. Richert, A.F. Buryanov, V.S. Lesovik, & V.V. Strokova (Eds.), Modern building materials, technologies and constructions: materials of the International Scientific-Practical Conference Dedicated to the 95th Anniversary of FSBEI HPE “GSTU named after academician M.D. Millionshchikov”. In 2 Volumes (pp. 248–253). Publishing and Printing Complex Grozny Worker.
15. Hans-Ulrich, K. (2011). Erfahrungen beim Einsatz industriell nachgestellter Gipsmörtel zur Sanierung historischer Bauwerke. Weimarer Gipstagung (pp. 177–183).
16. Lesovik, V. (2019). Geonics (geomimetics) as a theoretical basis for new generation composites. In V. Lesovik, A. Volodchenko, E. Glagolev, I. Lashina, & H.B. Fischer (Eds.), 14th International Congress for Applied Mineralogy (ICAM2019). Springer Proceedings in Earth and Environmental Sciences (pp. 344–347). Publishing House of the Belgorod State Technological University named after Shukhov V.G.
17. Lesovik, V.S. (2012). Geonika. Subject and tasks: monograph. Publishing House of the Belgorod State Technological University named after Shukhov V.G.
International Journal of Composite and Constituent Materials
| Volume | |
| Received | February 15, 2021 |
| Accepted | April 9, 2021 |
| Published | April 9, 2023 |