Inhibitors Used to Control Corrosion of Mild Steel in Crude Oil Recovery

Open Access

Year : 2021 | Volume : | Issue : 1 | Page : 18-39
By

    Rajesh Kumar Singh

  1. Associate Professor, Department of Chemistry, Jagdam College, J P University, Chapra, Bihar, India

Abstract

Industries first select construction materials on the basis of safety and cost-effectiveness. Physical requirements can be satisfied easily but corrosion effects seriously complicate the selection of suitable materials. The corrosion-mitigations can be enhanced by the coating of organic and inorganic substance but its costs must also be considered. The cost of material depends upon design and physical requirements of the material. The attractive facial appearance makes the material expensive. Initially materials face localized corrosion which is also known as general corrosion. Localized corrosion is more insidious form of deterioration under certain conditions. It can promote stress corrosion which leads to the cracking of materials. It is very difficult to detect localized corrosion early and to monitor it effectively. The use of corrosion inhibitors is a practical and economical method, which can be designed according to the environmental conditions. Industrial use of the corrosion inhibitors may exceed the budget amount. A recent survey estimated that the US industry spent $798 M (1.54 M tonne) on corrosion inhibitor chemicals in 1986. This paper attempts to provide details of chemical corrosion inhibitors as a broader introduction.

Keywords: Inhibitor, Design inhibitors, Commercial uses of inhibitor, Localized corrosion

[This article belongs to International Journal of Composite and Constituent Materials(ijccm)]

How to cite this article: Rajesh Kumar Singh Inhibitors Used to Control Corrosion of Mild Steel in Crude Oil Recovery ijccm 2021; 7:18-39
How to cite this URL: Rajesh Kumar Singh Inhibitors Used to Control Corrosion of Mild Steel in Crude Oil Recovery ijccm 2021 {cited 2021 Jun 24};7:18-39. Available from: https://journals.stmjournals.com/ijccm/article=2021/view=91692

Full Text PDF Download

Browse Figures

References

1. Aboia OK and James AO (2010), “The effects of Aloe Vera extract on corrosion and kineties of corrosion process of zinc in HCl solution”, Corrosion Science, 52(2), 661-664.
2. Eddy NO and Odoemelam SA (2009), “Inhibition of corrosion of mild steel in acidic medium using ethanol extract of Aloe Vera”, Pigment and Resin Technology, 32(2), 111-115.
3. Bouyaner A and Hammout B (2006), “Pennyroyal oil from Menthapulegium as corrosion inhibitor for steel in M HCl”, Materials Letters, 60(23), 2840-2843.
4. De Souza FS and Spinelli A (2009), “Caffeic acid as a green corrosion inhibitor in mild steel, Corrosion Science 51(3), 642-649.
5. Lebrine M, Robert F and Roos C (2010), “Inhibition effects of alkaloids extract from Annona Squamosa plant on the corrosion of C38 Steel in normal hydrochloric acid medium”, International Journal of Electrochemical Science, 5(11), 1678-1712.
6. Uwah IE, Okafor P C and Ebiekpe E, (2010), “Inhibitive action of ethanol extracts from Nauclealatifolic on the corrosion of mild steel in H2SO4 solution and their adsorption characteristics”, Arbian Journal of Chemistry
7. Okafor PC and Ebenso EE (2010), “Azadira chat indica extracts as corrosion inhibitor for mild steel in acidic medium”, International Journal of Electrochemical Science, 5(7), 978-993.
8. Oguzie EE (2008), “Evaluation of the inhibitive effect of some plant extracts on the acid corrosion of mild steel”, Corrosion Science, 50(10), 2993-2998.
9. Sethuram M G and Raja P B (2005), “Corrosion inhibition of mild steel by Datura metal in acidic medium”, Pigment and Resin Technology, 34(6), 347-352.
10. Satapathy AK and Gunaskaran G (2009), “Corrosion inhibition by Justicia gendarussa plant extract in hydrochloric acid solution” Corrosion Science, 51(12), 2848-2856.
11. Badiea AM and Mohana K N (2009), “Corrosion mechanism of low carbon steel in industrial water and adsorption thermodynamics in the presence of some plant extract”, Journal of Materials Engineering and Performance, 18(9), 1264-1271.
12. Rajenderan S, Jeyasundari J and Usha P (2009), “Corrosion behavior of aluminium in the presence of an aqueous extract of hibiscus rosansensis”, PortugaliaeElectrochemica Acta, 27(2), 153-164.
13. Singh RK and A Noor (2019), “Study on the Corrosion & Corrosion Protection of Brass Sculpture by Atmospheric Pollutants in Winter Season”, Modern Approach on Material Science 1(3), 54-62
14. Kumar S and Arora S (2009), “Synergistic effect of Calo tropis? plant in basic solution”, Journal of the Chilean Chemical Society, 54(1), 83-88.
15. Sivaraju M and Kannan K (2010), “Eco-friendly inhibitor (Tributes terrestrist?) for mild steel corrosion in 1NH phosphoric acid”, Asian Journal of Chemistry, 22(1), 233-244.
16. Okafor PC and Uwash I E (2009), “Combretum bracteosum extracts as eco-friendly corrosion inhibitor for mild steel in acidic medium”, Pigment and Resin Technology, 38(4), 236-241.
17. Qurasishi MA, Singh A and Singh VK, “Green approach to corrosion inhibition of mild steel in hydrochloric acid and sulphuric acid solutions by the extract of MurrayaKoenigii leaves”, Materials Chemistry and Physics, 122(1), 114-122.
18. 18 Singh R K and Thakur K Manjay (2018), “Mild Steel Corrosion Control by Nanocoating and Filler Compounds in Hostile Environments”, J of J Material Science, 4(3) (2018), 1-12.
19. Bhadra S, Singh NK and Khastgir D (2011), Polyaniline based anticorrosive and anti-molding coating, Journal of Chemical Engineering and Materials Science, 2(1), 1-11.
20. Szabo T, Molnar-Nagy L and Telegdi J (2011), Self-healing microcapsules and slow release microspheres in paints, Progress in Organic Coatings, 72, 52-57.
21. Wen NT, Lin CS, Bai CY and Ger MD (2008), Structures and characteristics of Cr (III) based conversion coatings on electrogalvanized steels, Surf. Coat. Technol, 203, 317.
22. Boerio FJ and Shah P (2005), Adhesion of injection molded PVC to steel substrates, J of Adhesion 81(6) 645-675.
23. Deveci H, Ahmetti G and Ersoz M, (2012), Modified styrenes: Corrosion physico-mechanical and thermal properties evaluation, Prog. Org. Coat. 73 1-7.
24. Genzer J (2005), Templating Surfaces with Gradient Assemblies, J of Adhesion 81 417-435.
25. Leon-Silva U, Nicho ME (2010), Poly(3-octylthiophhene) and polystyrene blends thermally treated as coating for corrosion protection of stainless steel 304, J. Solid State Electrochem, 14 1487-1497.
26. Baier RE (2006) Surface behaviour of biomaterials: Surface for biocompatibility, J. Mater. Sci. Mater. Med. 17 1057-1062.
27. Rao BVA, Iqbal MY and Sreehar B (2010), Electrochemical and surface analytical studies of the self assembled monolayer of 5-methoxy-2-(octadeclthiol?) benzimidazole in corrosion protection of copper, Electrochim, Acta, 55 620-631.
28. Liu XY, Ma HY and Hou MZ (2009), Self-assembled monolayers of stearic imidazoline on copper electrodes detected using electro chemical measurement, XPS, molecular simulation and FTIR, Chinese Sci. Bull. 54 374-381.
29. Liao QQ, Yue ZW and Zhou Q (2009), Corrosion inhibition effect of self-assembled monolayers of ammonium pyrrolidine dithiocarbamate on copper, Acta Phys. Chin. Sin. 25 1655-1661.
30. Zhang DQ, He XM and Kim GS (2009), Arginine self-assembled monolayers against copper corrosion and synergetic effect of iodide ion, J. Appl. Electrochem 39 1193-1198.
31. Sahoo RR and Biswas SK (2009), Frictional response of fatty acids on steel, J. Colloid Interf. Sci. 333 707-718.
32. Raman R and Gawalt ES (2007), Self-assembled monolayers of alkanoic acid on the native oxide surface of SS316L by solution deposition, Langmuir, 23 2284-2288.
33. Li DG, Chen SH and Zhao S Y (2006), the corrosion Inhibition of the self-assembled Au and Ag nanoparticles films on the surface of copper, Colloid. Surface. A 273 16-23.
34. Cristiani P, Perboni G and Debenedetti A (2008), Effect of chlorination on the corrosion of Cu|Ni 70|30 condenser tubing, Electrochim. Acta 54 100-107.
35. Cristiani P (2005), Solutions fouling in power station condensers, Appl. Therm. Eng. 25 2630-2640.
36. Videla H and LK Herrera (2009), Understanding microbial inhibition of corrosion, Electrochem. Acta, 39 229-234.
37. Bibber JW (2009), Chromium free conversion coating for zinc and its alloys, Journal of Applied Surface Finishing, Vol. 2(4) 273-275.
38. Ghareba GS and Omanovic S (2010), Interaction of 12-aminododecanoic acid with a carbon steel surface: Towards the development of ‘green’ corrosion inhibitors, Corrosion Sci. 52 2104-2113.
39. Singh R (2016), Corrosion protection of transport vehicles by nanocoating of decahydrobenzo [8] annulene-5,10-dihydrazone and SiC filler in H2O(moist), CO2, SO2 environments and weather change, Journal of Metallurgy and Materials Science, 58 167-179.
40. Singh RK (2017), Corrosion protection of transport vehicles by nanocoating of decahydrobenzo [8] annulene-5, 10-dihydrazone in corrosive environments and weather change, Journal of Powder Metallurgy & Mining, 1 2-8.
41. Singh RK (2017), Atmospheric corrosion protection of epoxy-coated stainless steel by nanocoating of decahydrobenzo [8] annulene-5, 10-disemecarbazone and TiN filler, International J of NME 2(4) 17-32.


Regular Issue Open Access Article
Volume 7
Issue 1
Received May 11, 2021
Accepted May 29, 2021
Published June 24, 2021