Huzaifa Maaz Fazlurrahman,
Atteshamsuddin Sayyed,
- Student Department of Structural Engineering, Sanjivani College of Engineering, Kopargaon, Maharashtra, India
- Professor Department of Structural Engineering, Sanjivani College of Engineering, Kopargaon, Maharashtra, India
Abstract
This study introduces a novel higher-order shear deformation theory, tailored to accommodate various loading conditions experienced by laminated plates. The theory is specifically designed for the hygrothermal analysis of functionally graded plates. Three homogenization methods are used to calculate the Young’s Modulus that is Power law distribution, The exponential distribution and The Mori-Tanaka scheme. Navier’s solution scheme is used for flexural analysis of Functionally graded plates simply supported at all four edges. Obtained results for stresses and displacement are discussed and compare with previously published theories and results.
Keywords: Functionally graded plate, Stress-Strain relationship, Displacement field, Shear deformation theory, Functionally graded material
References
[1] Reddy J.N., “Analysis of functionally graded plates” International Journal for Numerical Methods In Engineering; 2000; vol.47: 663 – 21p.
[2] Liew K.M.and Ping Zhu, “A local kriging meshless method for free vibration analysis of functionally graded circular plates in thermal environments” International Journal; 2012; vol.31: 1089 – 5p.
[3] Farbod A., “Non-linear dynamic instability of functionally graded plates in thermal environments” International Journal of Non-Linear Mechanics; 2013; vol.50, 109 – 17p.
[4] Ootao, “Three-dimensional solution for transient thermal stresses of the functionally graded rectangular plate due to non-uniform heat supply” International Journal of Mechanical Sciences; 2005; vol.47: 1769 – 19p.
[5] Chandel N., Lamba N., and Manthena V., “Thermoelastic behavior of a Thin Circular Functionally Graded Material Disk subjected to Thermal Loads” International journal; 2015; vol.3: 72 – 2p.
[6] Tahar, “Analytical solution for bending analysis of functionally graded plates”, Scientia Iranica; 2013; vol.20: 516 – 7p.
[7] Zenkour A.M., “Effects of transverse shear and normal strains on FG plates resting on elastic foundations under hygro-thermo-mechanical loading” International Journal of Applied Mechanics; 2014; vol.6: 1 – 26p.
[8] Daouadji T.H., Tounsi A., and Bedia A.A., “A New Higher Order Shear Deformation Model for Static Behavior of Functionally Graded Plates” Advances in Applied Mathematics and Mechanics; 2012; vol.5: 351 – 13p.
[9] Sayyad A.S. and Ghugal Y.M., “Free vibration of thick orthotropic plates using trigonometric shear deformation theory” Latin American Journals of Solids and Structures 2010; vol.8: 229 – 14p.
[10] Mantari J.L., Oktem K.M.and Soares C.G., “A new trigonometric shear deformation theory for isotropic, laminated composite and sandwich plates” International Journal of Solids and Structures; 2012; vol.49: 43 – 10p.
[11] Thai H.T. and Kim S.E., “A simple higher-order shear deformation theory for bending and free vibration analysis of functionally graded plates” Composite Structures Journal; 2013; vol96: 165 – 8p.
[12] Shimpi R.P. and Patel H.G., “Free Vibrations of the plate using two variable refined plate theory” Journals of Sound and Vibration; 2006; vol.296: 979 – 20p.
[13] Mantari J.L., Oktem A.S. and Soares C.G., “A New Higher Order Shear Deformation Theory Laminated Composite and Sandwich Plates” Journals of Composites: part B; 2012; vol.43.
[14] Daouadji T.H., Tounsi A., and Bedia A.A., “Theoretical Analysis for Static and Dynamic Behavior of Functionally Graded Plates” Materials Physics and Mechanics; 2012; vol.14: 110 – 28p.
[15] Zenkour A.M., “Generalized shear deformation theory for bending analysis of FG plates” Applied Mathematical Modeling; 2006; vol.30: 67 – 17p.
[16] Zidi M., Tounsi A, Houarib M.S.A, Bediaa A, Beg O.A., “Bending analysis of FGM plates under hygro-thermo-mechanical loading using a four variable refined plate theory” Aerospace Science and Technology; 2014; vol.34: 24 – 10p.
Journal of Structural Engineering and Management
Volume | |
Received | June 3, 2024 |
Accepted | July 16, 2024 |
Published | July 18, 2024 |