Open Access
Mahesha C.R.,
- Assistant Professor Dr. Ambedkar Institute of Technology Karnataka India
Abstract
In this research study, the effect of chemically treated plant cellulose on the mechanical, fatigue, and fracture toughness behaviour of polyester composites was investigated. Ramie plant cellulose fibers were used as the reinforcing material, and polyester resin was used as the matrix material. Three different chemical treatment processes, namely alkalization, acetylation, and etherification, were used to adapt the superficial chemistry of the fibers and advance their compatibility with the polyester resin. The three different chemically treated fibers were incorporated into the polyester resin to prepare composite specimens. The mechanical properties, fatigue behaviour, and fracture toughness of these composites were evaluated using standard testing methods. The results showed that the chemical treatment of the plant cellulose fibers had a significant effect on the mechanical fatigue properties and fracture toughness of the composites. The alkalization treatment resulted in the highest improvement in fatigue, while the acetylation treatment resulted in the highest improvement in fracture toughness. The etherification treatment also showed significant improvements in these properties. In addition, the fracture toughness of the composites was evaluated using a three-point bending test method. The consequences displayed that the chemically treated fibers better the fatigue resistance of the composites, with the acetylation treatment showing the highest improvement. Overall, this research study demonstrates the potential of chemically treated plant cellulose fibers as a promising
reinforcement material for polyester composites. The findings of this study could have important implications for the development of sustainable and high-performance composite materials for various industrial applications.
Keywords: Alkalization, acetylation, etherification, polyester resin
[This article belongs to Journal of Polymer and Composites(jopc)]
Browse Figures
References
1. W. Li, Z. Zhang, L. Wu, Z. Zhu, and Z. Xu, “Improving the adhesion-to-fibers and film properties of corn starch by starch sulfo-itaconation for a better application in warp sizing,” Polymer Testing, vol. 98, p. 107194, 2021, doi: 10.1016/j.polymertesting.2021.107194.
2. F. Bollino, V. Giannella, E. Armentani, and R. Sepe, “Mechanical behaviour of chemically-treated hemp fibers reinforced composites subjected to moisture absorption,” Journal of Materials Research and Technology, vol. 22, pp. 762–775, 2023, doi: 10.1016/j.jmrt.2022.11.152.
3. A. J. Adeyi, M. O. Durowoju, O. Adeyi, E. O. Oke, O. A. Olalere, and A. D. Ogunsola, “Momordica augustisepala L. stem fibre reinforced thermoplastic starch: Mechanical property characterization and fuzzy logic artificial intelligent modelling,” Results in Engineering, vol. 10, no. January, p. 100222, 2021, doi: 10.1016/j.rineng.2021.100222.
4. W. Chen, H. Yu, Y. Liu, Y. Hai, M. Zhang, and P. Chen, “Isolation and characterization of cellulose nanofibers from four plant cellulose fibers using a chemical-ultrasonic process,” Cellulose, vol. 18, no. 2, pp. 433–442, 2011, doi: 10.1007/s10570-011-9497-z.
5. A. Guo et al., “Effects of Aluminum Hydroxide on Mechanical, Water Resistance, and Thermal Properties of Starch-based Fiber-reinforced Composites with Foam Structures,” Journal of Materials Research and Technology, vol. 23, pp. 1570–1583, 2023, doi: 10.1016/j.jmrt.2023.01.132.
6. K. Nwosu-Obieogu, G. W. Dzarma, G. Christian, U. C. Nonso, A. M. Awele, and O. O. Anozie, “Physico-chemical/mechanical properties of treated groundnut shell fibre; Response surface methodology and artificial neural network performance evaluation and optimisation,” Cleaner Waste Systems, vol. 2, no. July, p. 100017, 2022, doi: 10.1016/j.clwas.2022.100017.
7. X. Wang, C. He, S. C. Moore, and J. Ausió, “Effects of Histone Acetylation on the Solubility and Folding of the Chromatin Fiber,” Journal of Biological Chemistry, vol. 276, no. 16, pp. 12764–12768, 2001, doi: 10.1074/jbc.M100501200.
8. N. Zhang et al., “Effective extraction of fluoroquinolones from water using facile modified plant fibers,” Journal of Pharmaceutical Analysis, vol. 12, no. 5, pp. 791–800, 2022, doi: 10.1016/j.jpha.2022.06.004.
9. Y. Yan, H. Guo, K. Li, and L. Yan, “Fabrication of supported acid catalytic composite fibers by a simple and low-cost method and their application on the synthesis of liquid biofuel 5-ethoxymethylfurfural,” Green Energy and Environment, vol. 7, no. 1, pp. 165–171, 2022, doi: 10.1016/j.gee.2020.06.028.
10. N. Nawafleh et al., “Static and dynamic mechanical performance of short Kevlar fiber reinforced composites fabricated via direct ink writing,” Journal of Materials Science, vol. 55, no. 25, pp. 11284–11295, 2020, doi: 10.1007/s10853-020-04826-w.
11. S. Srisuwan, N. Prasoetsopha, N. Suppakarn, and P. Chumsamrong, “The effects of alkalized and silanized woven sisal fibers on mechanical properties of natural rubber modified epoxy resin,” Energy Procedia, vol. 56, no. C, pp. 19–25, 2014, doi: 10.1016/j.egypro.2014.07.127.
12. S. Zhang et al., “Graphene/ZrO2/aluminum alloy composite with enhanced strength and ductility fabricated by laser powder bed fusion,” Journal of Alloys and Compounds, vol. 910, p. 164941, 2022, doi: 10.1016/j.jallcom.2022.164941.
13. H. Li et al., “Preliminary investigation on underwater wet welding of Inconel 625 alloy: microstructure, mechanical properties and corrosion resistance,” Journal of Materials Research and Technology, vol. 20, pp. 2394–2407, 2022, doi: 10.1016/j.jmrt.2022.08.035.
14. H. Abdizadeh and M. A. Baghchesara, “Investigation on mechanical properties and fracture behaviour of A356 aluminum alloy based ZrO2 particle reinforced metal-matrix composites,” Ceramics International, vol. 39, no. 2, pp. 2045–2050, 2013, doi: 10.1016/j.ceramint.2012.08.057.
15. P. Poór, J. Kovács, P. Borbély, Z. Takács, Á. Szepesi, and I. Tari, “Salt stress-induced production of reactive oxygen- and nitrogen species and cell death in the ethylene receptor mutant Never ripe and wild type tomato roots,” Plant Physiology and Biochemistry, vol. 97, pp. 313–322, 2015, doi: 10.1016/j.plaphy.2015.10.021.
16. S. S. Harakannanavar, J. M. Rudagi, V. I. Puranikmath, A. Siddiqua, and R. Pramodhini, “Plant leaf disease detection using computer vision and machine learning algorithms,” Global Transitions Proceedings, vol. 3, no. 1, pp. 305–310, 2022, doi: 10.1016/j.gltp.2022.03.016.
Journal of Polymer and Composites
| Volume | 11 |
| Issue | 03 |
| Received | March 6, 2023 |
| Accepted | March 27, 2023 |
| Published | July 21, 2023 |