[{“box”:0,”content”:”[if 992 equals=”Open Access”]n
n
Open Access
nn
n
n[/if 992]n
n
n
n
n
n
Hemant Kumar Rao, Akash Chauhan, Md. Asfahan, Deepak Gautam, Ravi Shankar Yadav, Anchal Yadav,
n
- n t
n
n
n[/foreach]
n
n[if 2099 not_equal=”Yes”]n
- [foreach 286] [if 1175 not_equal=””]n t
- Associate Professor,, Student,, Student,, Student,, Student,, Student, Goel Institute of Management and Technology Lucknow,, Goel Institute of Management and Technology Lucknow,, Goel Institute of Management and Technology Lucknow,, Goel Institute of Management and Technology Lucknow,, Goel Institute of Management and Technology Lucknow,, Goel Institute of Management and Technology Lucknow, Uttar Pradesh,, Uttar Pradesh,, Uttar Pradesh,, Uttar Pradesh,, Uttar Pradesh,, Uttar Pradesh, India, India, India, India, India, India
n[/if 1175][/foreach]
n[/if 2099][if 2099 equals=”Yes”][/if 2099]n
Abstract
nWhile solar energy is a viable option, future clean energy solutions may require other energy sources. Renewable electricity sources are known for being affordable, easy to access, and not producing greenhouse gases. Photovoltaic cells, which turn sunlight into electrical power, are a good choice. Over the last twenty years, advancements in photovoltaic technology have lowered costs and improved the efficiency of solar cells. Perovskite materials, recognized for their unique crystal structure and flexible properties, are particularly promising for solar energy. The solar cell simulation software (SCAPS) Tool demonstrates that the hole transport layer (HTL) is essential for the efficiency of solar cells employing perovskite materials like CH3NH3PbI3. The electrical characteristics of MAPbI3 material in the active layer have been ascertained using quantitative computations and mathematical models, with particular attention to variables such as fill factor (FF), power conversion efficiency (PCE), short-circuit current density (Jsc), and open-circuit voltage (Voc). The capacitance-frequency (C-F) and capacitance-voltage (C-V) of previously researched solar power cells made from perovskite have been calculated. The simulation results show that MAPbI3 at different thickness of HTL provide FF=86.59, PCE=29.54, Voc=1.1837, and Jsc=28.82 mA/cm² at the 0.100 thickness and FF=85.64, PCE=29.22, Voc=1.1837, and Jsc=28.82 mA/cm² at 0.200 thickness and also FF=74.96, PCE=28.97, Voc=1.3408, and Jsc=28.82 mA/cm² at 0.300 thickness.
n
Keywords: Perovskite solar cell, CH3NH3PbI3, CuI, C-f, C-V, FF, Voc, Jsc, and PCE
n[if 424 equals=”Regular Issue”][This article belongs to Journal of Power Electronics and Power Systems(jopeps)]
n
n
n
n
n
nn[if 992 equals=”Open Access”] Full Text PDF Download[/if 992] n
nn[if 379 not_equal=””]n
Browse Figures
n
n[/if 379]n
References
n[if 1104 equals=””]n
- Hosenuzzaman , N.A. Rahim , J. Selvaraj , M. Hasanuzzaman , A.B.M.A. Malek , A. Nahar, ―Global prospects, progress, policies, and environmental impact of solar photovoltaic power generation,‖ Renewable and Sustainable Energy Reviews 41, 284–297, (2015).
- Kiran ranabhat, Leev patrikeev, Kirill andrianov, Valerii lapshinsky, Elena sofronova ―An Introduction to Solar Cell Technology,‖ 14(2016)4, 405, 481 – 491.
- -W. Chen, S.-Y. Hsiao, C.-Y. Chen, H.-W. Kang, Z.-
- Huang and H.-W. Lin, ―Optical properties of Organometal halide perovskite thin films and general device structure design rules for perovskite single and tandem solar cells,‖ 3, 9152-9159, 2015.
- Giordano F, Abate A, Correa Baena J P, Saliba M, Matsui T,Im S H, Zakeeruddin S M, Nazeeruddin M K,Hagfeldt A and Graetzel M, ―Enhanced electronic properties in mesoporous TiO2 via lithium doping for high efficiency perovskite solar cells,‖ 7 10379, 2016.
- J. Taghavi, M. Houshmand, M. H. Zandi and N. E. Gorji, ―Modeling of optical losses in perovskite solar cells,‖ 97, 424-428, 2016.
- Tanuj Tiwari, 2018. ―Next generation Soler Power technology‖, electronicsforu.com, May18,
- Rashmi Swami, 2012. ―Solar Cell,‖ International Journal of Scientific and Research Publications, Volume 2, Issue 7, July 1 ISSN 2250-3153
- Mohammad Tawheed Kibria, Akil Ahammed, Saad Mahmud Sony, Faisal Hossain, Shams-Ul-Islam, ―A Review Comparative studies on different generation solar cells technology,‖ ICEAB, Paper ID E33, 2014.
- Shruti Sharma, Kamlesh Kumar Jain, Ashutosh Sharma, ―Solar cell: In Research and Application –A Review Materials Sciences and Applications,‖ 2015, 6, 1145-1155
- Dazheng Chen and Chunfu Zhang, ―Interface Engineering and Electrode Engineering for Organic Solar Cells‖,2016, DOI: 10.5772/65312
- Pandey and R. Chaujar,―Numerical simulations: Toward the design of 27.6% efficient four-terminal semi-transparent perovskite/SiC passivated rear contact silicon tandem solar cell,‖ 2016,100, 656-666.
- -L. Huang, C.-M. Chen, Z.-K. Lin and S.-H. Yang,‖ Efficiency enhancement of regular-type perovskite solar cells based on Al-doped ZnO nanorods as electron transporting layers,‖ 2017,102, 94-102.
- S. Yang, J. H. Noh, N. J. Jeon, Y. C. Kim, S. Ryu, J.
Seo and S. I. Seok, ―High-performance photovoltaic perovskite layers fabricated through intra molecular exchange,‖ Science 348, 1234, 2015.
- Yu Miyazawa, Masashi Ikegami, Hsin-Wei Chen, Takeshi Ohshima, Mitsuru Imaizumi, Kazuyuki Hirose, Tsutomu Miyasaka, ―Tolerance of Perovskite Solar Cell to High-Energy Particle Irradiations in Space Environment,‖ April 27, Miyazawa et al., iScience 2, 148–155, 2018.
- -P. Correa-Baena, A. Abate, M. Saliba, W. Tress, T.
- Jacobsson, M. Grätzel and A. Hagfeldt, ―The rapid evolution of highly efficient perovskite solar cells,‖ Energy Environ. Sci. DOI: 10.1039/C6EE03397K, 2017.
- Nandi Wu, Yiliang Wu, Daniel Walter, Heping Shen, The Duong, Dale Grant, Chog Barugkin, Xiao Fu, Jun Peng, Thomas White, Kylie Catchpole, and Klaus Weber. ―Identifying the Cause of Voltage and Fill Factor Losses in Perovskite Solar Cells by Using Luminescence Measurements,‖ DOI: 1002
/ente201700374.
- Syed Zulqarnain Haider, Hafeez Anwar, Mingqing Wang, ―A comprehensive device modeling of Perovskite solar cell with inorganic copper iodide as hole transport material,‖ Semicond. Sci. Technol. 33, 0 35001 (12pp), 2018.
- Verschraegen and M. Burgelman, ―Numerical modeling of intra-band tunneling for hetero junction solar cells in SCAPS‖, Thin Solid Films, 515 (15), 6276-6279 (2007)
- Prasanth kumar and Giri babu, ―Recent advances in perovskite-based solar cells‖. Curr. Sci., 111 1173– 81
- masuko, M. shigematsu, T. hashiguchi, D. fujishima, M. kai, N. yoshimura, T. yamaguchi, Y. ychihashi, T. Yamanishi, T. Takahama, M. Taguchi, E. Maruyama, S. Okamoto, T. Mishima, N. Matsubara, T. Yamanishi, T. Takahama, M. Taguchi, E. Maruyama, and S. Okamoto, ―Achievement of More Than 25% Conversion Efficiency with Crystalline Silicon Heterojunction Solar Cell,‖ IEEE Journal of Photovoltaic Vol.4, Issue6, pp. 1433–1435, 2016.
- Wehrenfennig, G.E. Eperon, M.B. Johnston, H.J. Snaith, L.M. Herz, 2014. ―High Charge Carrier Mobilities and Lifetimes in Organolead Tri halide Perovskite‖. Journal of Advanced Materials, Vol. 26 ,
- 1584-1589
- Bottaro and Moscowitz, ―Current photovoltaic technology: current progress and future prospects,‖ 1997, MIT-EL77-041W
- Homes CC, 2001. ―Optical response of high dielectric- constant perovskite related oxide‖. science 293 673-6
nn[/if 1104][if 1104 not_equal=””]n
- [foreach 1102]n t
- [if 1106 equals=””], [/if 1106][if 1106 not_equal=””],[/if 1106]
n[/foreach]
n[/if 1104]
nn
nn[if 1114 equals=”Yes”]n
n[/if 1114]
n
n
n
n
n
n
n
| Volume | 14 | |
| [if 424 equals=”Regular Issue”]Issue[/if 424][if 424 equals=”Special Issue”]Special Issue[/if 424] [if 424 equals=”Conference”][/if 424] | 02 | |
| Received | June 3, 2024 | |
| Accepted | July 2, 2024 | |
| Published | August 6, 2024 |
n
n
n
n
n
n nfunction myFunction2() {nvar x = document.getElementById(“browsefigure”);nif (x.style.display === “block”) {nx.style.display = “none”;n}nelse { x.style.display = “Block”; }n}ndocument.querySelector(“.prevBtn”).addEventListener(“click”, () => {nchangeSlides(-1);n});ndocument.querySelector(“.nextBtn”).addEventListener(“click”, () => {nchangeSlides(1);n});nvar slideIndex = 1;nshowSlides(slideIndex);nfunction changeSlides(n) {nshowSlides((slideIndex += n));n}nfunction currentSlide(n) {nshowSlides((slideIndex = n));n}nfunction showSlides(n) {nvar i;nvar slides = document.getElementsByClassName(“Slide”);nvar dots = document.getElementsByClassName(“Navdot”);nif (n > slides.length) { slideIndex = 1; }nif (n (item.style.display = “none”));nArray.from(dots).forEach(nitem => (item.className = item.className.replace(” selected”, “”))n);nslides[slideIndex – 1].style.display = “block”;ndots[slideIndex – 1].className += ” selected”;n}n”}]