Open Access
Shewale M. M,
Babar A.V,
Dr. Inamdar N. N,
Dr.P.V. Pakale,
- Assistant Professor Department of pharmaceutical chemistry, Krishna Institute of Pharmacy, Krishna Vishwa Vidyapeeth Maharashtra India
- Assistant Professor Department of Pharmaceutics, Krishna Institute of Pharmacy, Krishna Vishwa Vidyapeeth Maharashtra India
- Assistant Professor Government College of Pharmacy, Kathora Naka, Amravati Maharashtra India
- Assistant Professor Department of Pharmacology, Krishna Institute of Medical Sciences, Krishna Vishwa Vidyapeeth Maharashtra India
Abstract
Modern healthcare depends on advanced medical products that come up with new ways to care for and help patients. Characterizing these products is important to make sure they are safe, effective, and work well. While there are many analysis methods, Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and Dynamic Mechanical Analysis (DMA) are the most important ones for checking the temperature and mechanical qualities of medical materials. By measuring the heat flow that goes along with physical and chemical changes, DSC is often used to look into the thermal shifts and stability of materials. DSC is useful in medicine because it helps scientists understand phase changes, crystallinity, and how well materials work with living things. This information is used to make better drug delivery systems, devices, and nanomaterials. TGA works with DSC to measure how much the mass of a material changes over time or at different temperatures. This method works really well for checking how medical materials, like plastics, composites, and biodegradable structures, break down and change over time when heated. TGA lets experts check the stability and breakdown rates of medical devices and implants by looking at how much weight people lose. This makes sure that the devices and implants will work well and be compatible with the body in the long run. DMA looks at how materials behave mechanically when they are loaded and unloaded quickly. It gives useful information about stiffness, damping, and viscoelastic qualities. When it comes to medical materials, DMA is a key part of figuring out how strong, resistant to wear, and compatible implants, limbs, and tissue-engineered structures are. DMA helps engineers and doctors understand how materials react mechanically inside the human body by mimicking physiological conditions. This information guides the creation of new medical devices and implants
Keywords: Medical materials, Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), Characterization techniques
[This article belongs to Special Issue under section in Journal of Polymer and Composites(jopc)]
Browse Figures
References
- Pavon, C.; Aldas, M.; López-Martínez, J.; Ferrándiz, S. New Materials for 3D-Printing Based on Polycaprolactone with Gum Rosin and Beeswax as Additives. Polymers 2020, 12, 334.
- Arrieta, M.P.; Peltzer, M.A.; López, J.; del Carmen Garrigós, M.; Valente, A.J.M.; Jiménez, A. Functional Properties of Sodium and Calcium Caseinate Antimicrobial Active Films Containing Carvacrol. J. Food Eng. 2014, 121, 94–101.
- Alsubari, S.; Zuhri, M.Y.M.; Sapuan, S.M.; Ishak, M.R.; Ilyas, R.A.; Asyraf, M.R.M. Potential of natural fiber reinforced polymer composites in sandwich structures: A review on its mechanical properties. Polymers 2021, 13, 423.
- Sabaruddin, F.A.; Paridah, M.T.; Sapuan, S.M.; Ilyas, R.A.; Lee, S.H.; Abdan, K.; Mazlan, N.; Roseley, A.S.M.; Abdul Khalil, H.P.S. The Effects of Unbleached and Bleached Nanocellulose on the Thermal and Flammability of Polypropylene-Reinforced Kenaf Core Hybrid Polymer Bionanocomposites. Polymers 2021, 13, 116.
- Nazrin, A.; Sapuan, S.M.; Zuhri, M.Y.M.; Ilyas, R.A.; Syafiq, R.; Sherwani, S.F.K. Nanocellulose reinforced thermoplastic starch (TPS), polylactic acid (PLA), and polybutylene succinate (PBS) for food packaging applications. Front. Chem. 2020, 8, 213.
- Sukumaran, N.P.; Gopi, S. Overview of biopolymers: Resources, demands, sustainability, and life cycle assessment modeling and simulation. In Biopolymers and Their Industrial Applications; Elsevier: Amsterdam, The Netherlands, 2021; pp. 1–19.
- Edhirej, R.A.; Aisyah, H.A.; Ibrahim, R.; Atikah, M.S.N.; Salwa, H.N.; Aung, M.M.; SaifulAzry, S.O.A.; Megashah, L.N.; Ainun, Z.M.A. Renewable Sources for Packaging Materials. In Bio-Based Packaging: Material, Environmental and Economic Aspects; John Wiley & Sons: Hoboken, NJ, USA, 2021; pp. 353–370.
- Edhirej, A.; Sapuan, S.M.; Jawaid, M.; Zahari, N.I. Preparation and characterization of cassava bagasse reinforced thermoplastic cassava starch. Fibers Polym. 2017, 18, 162–171.
- Adeyeye, O.A.; Sadiku, E.R.; Reddy, A.B.; Ndamase, A.S.; Makgatho, G.; Sellamuthu, P.S.; Perumal, A.B. The use of biopolymers in food packaging. In Green Biopolymers and Their Nanocomposites; Springer: Singapore, 2019; pp. 137–158.
- Ajani, S. N. ., Khobragade, P. ., Dhone, M. ., Ganguly, B. ., Shelke, N. ., & Parati, N. . (2023). Advancements in Computing: Emerging Trends in Computational Science with Next-Generation Computing. International Journal of Intelligent Systems and Applications in Engineering, 12(7s), 546–559
- Ilyas, R.A.; Sapuan, S.M.; Ibrahim, R.; Abral, H.; Ishak, M.R.; Zainudin, E.S.; Atikah, M.S.N. Effect of sugar palm nanofibrillated cellulose concentrations on morphological, mechanical and physical properties of biodegradable films based on agro-waste sugar palm (Arenga pinnata (Wurmb.) Merr) starch. J. Mater. Res. Technol. 2019, 8, 4819–4830.
- Saavedra-Leos, Z.; Leyva-Porras, C.; Araujo-Díaz, S.B.; Toxqui-Terán, A.; Borrás-Enríquez, A.J. Technological application of maltodextrins according to the degree of polymerization. Molecules 2015, 20, 21067–21081.
- Araujo-Díaz, S.; Leyva-Porras, C.; Aguirre-Bañuelos, P.; Álvarez-Salas, C.; Saavedra-Leos, Z. Evaluation of the physical properties and conservation of the antioxidants content, employing inulin and maltodextrin in the spray drying of blueberry juice. Carbohydr. Polym. 2017, 167, 317–325.
- Leyva-Porras, C.; Saavedra–Leos, M.; López-Pablos, A.; Soto-Guerrero, J.; Toxqui-Terán, A.; Fozado-Quiroz, R. Chemical, thermal and physical characterization of inulin for its technological application based on the degree of polymerization. J. Food Process Eng. 2017, 40, e12333.
- Katayama, Y.; Mizutani, T.; Utsumi, W.; Shimomura, O.; Yamakata, M.; Funakoshi, K. A first-order liquid–liquid phase transition in phosphorus. Nature 2000, 403, 170.
- Charoenrein, S. Microstructural changes and their relationship with quality and stability of frozen foods. In Food Microstructure and Its Relationship with Quality and Stability; Elsevier: Duxford, UK, 2018; pp. 123–138.
- Fukuma, Y.; Yamane, A.; Itoh, T.; Tsukamasa, Y.; Ando, M. Application of supercooling to long-term storage of fish meat. Fish. Sci. 2012, 78, 451–461.
- Mendoza-Duarte, M.E.; Estrada-Moreno, I.A.; López-Martínez, E.I.; Vega-Rios, A. Effect of the Addition of Different Natural Waxes on the Mechanical and Rheological Behavior of PLA—A Comparative Study. Polymers 2023, 15, 305.
- Bai, T.; Zhu, B.; Liu, H.; Wang, Y.; Song, G.; Liu, C.; Shen, C. Biodegradable poly(lactic acid) nanocomposites reinforced and toughened by carbon nanotubes/clay hybrids. Int. J. Biol. Macromol. 2020, 151, 628–634.
- Gordobil, O.; Egüés, I.; Llano-Ponte, R.; Labidi, J. Physicochemical properties of PLA lignin blends. Polym. Degrad. Stab. 2014, 108, 330–338.
- Gorrasi, G.; Pantani, R. Effect of PLA grades and morphologies on hydrolytic degradation at composting temperature: Assessment of structural modification and kinetic parameters. Polym. Degrad. Stab. 2013, 98, 1006–1014.
- Cruz, R.; Nisar, M.; Palza, H.; Yazdani-Pedram, M.; Aguilar-Bolados, H.; Quijada, R. Development of bio degradable nanocomposites based on PLA and functionalized graphene oxide. Polym. Test. 2023, 124, 108066.
- Darie-Niţə, R.N.; Vasile, C.; Irimia, A.; Lipşa, R.; Râpə, M. Evaluation of some eco-friendly plasticizers for PLA films processing. J. Appl. Polym. Sci. 2016, 133, 1–11.
Journal of Polymer and Composites
Volume | 12 |
Special Issue | 04 |
Received | May 15, 2024 |
Accepted | June 23, 2024 |
Published | July 15, 2024 |