[{“box”:0,”content”:”[if 992 equals=”Open Access”]
Open Access
n
[/if 992]n
n
n
n
n
- n t
n
Kalapala Vijay Babu, CH. Mallika Chowdary
[/foreach]
n
n
n[if 2099 not_equal=”Yes”]n
- [foreach 286] [if 1175 not_equal=””]n t
- PG Student, Assistant Professor, Department of Civil Engineering, KLEF University,, Department of Civil Engineering, KLEF University, Andhra Pradesh, Andhra Pradesh, India, India
n[/if 1175][/foreach]
[/if 2099][if 2099 equals=”Yes”][/if 2099]nn
Abstract
nThe rising expense of building, along with the progressive impact on the environment, has driven experts to adopt natural fibers such as coir and bamboo fibers and synthetic fibers such as plastic fibers for boosting concrete strength. Fibers are readily available at the test location, making them comparatively suitable as a reinforcing material in concrete. Concrete with fibers was compared to conventional concrete, and different strength parameters such as bending, compression, and tensile strength of coir, bamboo and plastic fibers were varied as a proportion (0.5%, 1%) of total weight of the volume of concrete. The influence of fiber form on strength property was investigated by testing using fiber of predefined dimensions. The ideal amount of both natural fiber and synthetic fiber was identified via a trial-and-error procedure, as was the zero percentage of super plasticizer are used for both regular cement concrete and coir, bamboo and plastic fibers in the concrete to function properly
n
Keywords: Bamboo Fiber, Bitumen, Coir Fiber, Compressive Strength, Flexural Strength, Plastic Fiber, Tensile Strength
n[if 424 equals=”Regular Issue”][This article belongs to Journal of Polymer and Composites(jopc)]
n
n
n
n
n
n
n[if 992 equals=”Open Access”] Full Text PDF Download[/if 992] nn
n[if 379 not_equal=””]nBrowse Figures
n
n[/if 379]n
References
n[if 1104 equals=””]n
[1] M. A. Farooq, M. Fahad, B. Ali, S. ullah, M. H. El Ouni, and A. B. Elhag, “Influence of nylon fibers recycled from the scrap brushes on the properties of concrete: Valorization of plastic waste in concrete,” Case Stud. Constr. Mater., vol. 16, no. April, p. e01089, 2022, doi: 10.1016/j.cscm. 2022.e01089.
[2] S. Salhotra, R. K. Khitoliya, and S. Kumar, “Comparative study of uncoated and coated waste PET fiber for sustainable concrete,” Mater. Today, Proc., vol. 80, no. xxxx, pp. 2022–2026, 2023, doi: 10.1016/j.matpr.2021.06.060.
[3] E. O. Fanijo, J. T. Kolawole, A. J. Babafemi, and J. Liu, “A comprehensive review on the use of recycled concrete aggregate for pavement construction: Properties, performance, and sustainability,” Clean. Mater., vol. 9, no. December 2022, p. 100199, 2023, doi: 10.1016/j.clema.2023.100199.
[4] J. Ahmad, Z. Zhou, and A. F. Deifalla, “Structural properties of concrete reinforced with bamboo fibers: a review,” J. Mater. Res. Technol., vol. 24, pp. 844–865, 2023, doi: 10.1016/j.jmrt.2023.03.038.
[5] C. M. Chowdary* and I. S. Kishore, “Comparative Study of the Natural Fiber and Artificial Fibre as an Admixture in M30 Grade Concrete,” Int. J. Inven. Eng. Sci., vol. 5, no. 12, pp. 9–14, 2020, doi: 10.35940/ijies. k0998.1051220.
[6] I. S. Kishore and C. M. Chowdary, “Influence of steel fibers as admix in normal concrete mix,” Int. J. Civ. Eng. Technol., vol. 7, no. 1, pp. 93–103, 2016.
[7] S. Muntongkaw, S. Pianklang, and N. Tangboriboon, “Modifications to improve properties of gypsum ceiling composites as multifunctional construction by embedding Typha angustifolia fiber and natural rubber latex compound,” Case Stud. Constr. Mater., vol. 15, no. August, p. e00658, 2021, doi: 10.1016/j.cscm. 2021.e00658.
[8] A. Jalal, L. Hakim, and N. Shafiq, “Mechanical and post-cracking characteristics of fiber reinforced concrete containing copper-coated steel and PVA fibers in 100% cement and fly ash concrete,” Appl. Sci., vol. 11, no. 3, pp. 1–14, 2021, doi: 10.3390/app11031048.
[9] Y. O. Özkılıç’ et al., “Lightweight expanded-clay fiber concrete with improved characteristics reinforced with short natural fibers,” Case Stud. Constr. Mater., vol. 19, no. August, 2023, doi: 10.1016/j.cscm. 2023.e02367.
[10] I. Wijatmiko, A. Wibowo, and C. R. Nainggolan, “Characteristics of PVC Coated Welded Wire Mesh Fiber Reinforced Concrete,” Civ. Eng. Dimens., vol. 21, no. 1, pp. 52–58, 2019, doi: 10.9744/ced.21.1.50-56.
[11] Y. Jiang, Y. Yan, T. Li, X. Cao, L. Yu, and H. Qi, “Comparison of the Mechanical Properties and Crack Expansion Mechanism of Different Content and Shapes of Brass-Coated Steel Fiber-Reinforced Ultra-High-Performance Concrete,” Materials (Basel)., vol. 16, no. 6, 2023, doi: 10.3390/ma16062257.
[12] H. Jia et al., “Effect of synthetic fibers on the mechanical performance of asphalt mixture: A review,” J. Traffic Transp. Eng. (English Ed., vol. 10, no. 3, pp. 331–348, 2023, doi: 10.1016/j.jtte.2023.02.002.
[13] N. S. A. Yaro, M. Bin Napiah, M. H. Sutanto, A. Usman, and S. M. Saeed, “Performance evaluation of waste palm oil fiber reinforced stone matrix asphalt mixtures using traditional and sequential mixing processes,” Case Stud. Constr. Mater., vol. 15, no. July, p. e00783, 2021, doi: 10.1016/j.cscm. 2021.e00783.
[14] J. Li et al., “Research progresses of fibers in asphalt and cement materials: A review,” J. Road Eng., vol. 3, no. 1, pp. 35–70, 2023, doi: 10.1016/j.jreng.2022.09.002.
[15] T. P. Huynh, T. Ho Minh Le, and N. Vo Chau Ngan, “An experimental evaluation of the performance of concrete reinforced with recycled fibers made from waste plastic bottles,” Results Eng., vol. 18, no. June, p. 101205, 2023, doi: 10.1016/j.rineng.2023.101205.
nn[/if 1104][if 1104 not_equal=””]n
- [foreach 1102]n t
- [if 1106 equals=””], [/if 1106][if 1106 not_equal=””],[/if 1106]
n[/foreach]
n[/if 1104]
nn
nn[if 1114 equals=”Yes”]n
n[/if 1114]
n
n
n
| Volume | ||
| [if 424 equals=”Regular Issue”]Issue[/if 424][if 424 equals=”Special Issue”]Special Issue[/if 424] [if 424 equals=”Conference”][/if 424] | ||
| Received | February 9, 2024 | |
| Accepted | February 17, 2024 | |
| Published | April 19, 2024 |
n
n
n
n
n
nn function myFunction2() {n var x = document.getElementById(“browsefigure”);n if (x.style.display === “block”) {n x.style.display = “none”;n }n else { x.style.display = “Block”; }n }n document.querySelector(“.prevBtn”).addEventListener(“click”, () => {n changeSlides(-1);n });n document.querySelector(“.nextBtn”).addEventListener(“click”, () => {n changeSlides(1);n });n var slideIndex = 1;n showSlides(slideIndex);n function changeSlides(n) {n showSlides((slideIndex += n));n }n function currentSlide(n) {n showSlides((slideIndex = n));n }n function showSlides(n) {n var i;n var slides = document.getElementsByClassName(“Slide”);n var dots = document.getElementsByClassName(“Navdot”);n if (n > slides.length) { slideIndex = 1; }n if (n (item.style.display = “none”));n Array.from(dots).forEach(n item => (item.className = item.className.replace(” selected”, “”))n );n slides[slideIndex – 1].style.display = “block”;n dots[slideIndex – 1].className += ” selected”;n }n”}]