Reshma S,
Sonima M.P.,
- Faculty Department of Electrical and Electronics Engineering, College of Engineering Kidangoor Kerala India
- Faculty Department of Electrical and Electronics Engineering, College of Engineering Kidangoor Kerala India
Abstract
In the era of transportation, the best effort will be to replace conventional fossil fuels. Instead, the usage of fossil fuels will give way to renewable energy sources and other clean energies. Many institutions promote the developments and research in the area of hydrogen fuel cell development. This paper passes through the hydrogen fuel cell area as the primary source considered here is a hydrogen fuel cell. Since electric motors are the main stem of an electric vehicle (EV), in this paper the selection of the motor and its design is also discussed. This paper deals with the study of energy transfer over stages used in electric vehicles. Energy generated from the hydrogen fuel cell is converted into electricity which is used to drive the permanent magnet synchronous motor (PMSM) and hence the vehicle at the desired speed with the least effort in all real phase circumstances. The proposed paper analyses in detail the outcomes of an electric vehicle with all the constraints. For the smooth operation of an electric vehicle, a control strategy is being developed. The proposed system is simulated in MATLAB and a real case electric vehicle is designed with the help of MATLAB.
Keywords: Hydrogen fuel cell, boost converter, DC-voltage controller, torque controller, PMSM drive, Vehicle dynamics
[This article belongs to Journal of Nuclear Engineering & Technology(jonet)]
References
- Anzicek J and Thompson M 2005, DC-DC boost converter design for Kettering University GEM fuel cell vehicle, In Electrical Insulation Con- ference and Electrical Manufacturing Expo, 2005. Proceedings IEEE, pp. 307-316.
- Buomsik Shin, Youngsoo Cho, Daeha Han, Soonho Song, Kwang MinChun,aˆInvestigationof the effectsofhydrogenoncylinder pressure inasplit-injectiondiesel engine at heavy EGRaˆ,InternationalJournal ofHydrogen Energy 36 (2011) pp. 13115-13170.
- Veerachary, ”Design and analysis of a new quadratic boost converter,” 2017 National Power Electronics Conference (NPEC), Pune, 2017, pp. 307-313, doi: 10.1109/NPEC.2017.8310476.
- Wu, C. Chang, Y. Zhang, J. Hu and Y. Chen, ”Design of a low EMI boost converter using bi-frequency PFM control mode,” 2015 International Symposium on Next-Generation Electronics (ISNE), Taipei, 2015, pp. 1-4, doi: 10.1109/ISNE.2015.7131966.
- M. Rahman, M. N. Uddin and M. K. Islam, ”Integration of bi- directional DC-DC converter and highly efficient boost converter for electric vehicles applications,” 2015 IEEE 11th International Conference on Power Electronics and Drive Systems, Sydney, NSW, 2015, pp. 687- 691, doi: 10.1109/PEDS.2015.7203389.
- Salam and C. J. Goodman, ”Compensation of fluctuating DC link voltage for traction inverter drive,” 1996 Sixth International Conference on Power Electronics and Variable Speed Drives (Conf. Publ. No. 429), Nottingham, UK, 1996, pp. 390-395, doi: 10.1049/cp:19960946.
- Jia, C. Hu, S. Du, M. Chen, P. Lin and D. Xu, ”DC-link voltage control strategy of a bi-directional DC/DC converter for electric vehicles,” 2015 IEEE Energy Conversion Congress and Exposition (ECCE), Montreal, QC, 2015, pp. 92-99, doi: 10.1109/ECCE.2015.7309674.
- Buomsik Shin, Youngsoo Cho, Daeha Han, Soonho Song, and Kwang MinChun,aˆHydrogen effectsonNO emissionsandbrake thermal effi- ciency in a diesel engine under low-temperature and heavy-EGR condi- tionsaˆ,International Journal of Hydrogen Energy 36 (2011) pp. 6281-62
- Luo, ”A novel hybrid resonant PI controller to decrease DC capaci- tance for EV charger,” 2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific), Beijing, 2014, pp. 1-3, doi: 10.1109/ITEC-AP.2014.6940795.
- R. Menon, N. A. Azeez, A. H. Kadam and S. S. Williamson, ”Energy loss analysis of traction inverter drive for different PWM techniques and drive cycles,” 2018 IEEE International Conference on Industrial Electronics for Sustainable Energy Systems (IESES), Hamilton, 2018, pp. 201-205, doi: 10.1109/IESE2018.8349874.
- Yu, Q. Lei and F. Z. Peng, ”Boost converter Inverter system using PWAM for HEV/EV motor drive,” 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC), Orlando, FL, 2012, pp. 946/950, doi: 10.1109/APEC.2012.6165932.
- Oleschuk and V. Ermuratskii, ”Novel Methods, Schemes and Tech- niques of Synchronous Modulation for Control of Transport Power Conversion Systems: An Overview,” 2019 Electric Vehicles Interna- tional Conference (EV), Bucharest, Romania, 2019, pp. 1 to 6, doi: 10.1109/EV.2019.8892863.
- S. Bharatkar, R. Yanamshetti, D. Chatterjee and A. K. Ganguli, ”Performance comparison of PWM inverter fed IM drive and BLDC drive for vehicular applications,” 2009 IEEE International Conference on Vehicular Electronics and Safety (ICVES), Pune, 2009, pp. 125 to 129, doi: 10.1109/ICVES.2009.5400236.
- MicheF, Fieseler.H, Allidiers.L, Liquid Hydrogen Technologies for Mo- bile Use. In Proceedings of the 16th World Hydrogen Energy Conference 2006 (WHEC 2006), Lyon, France, 13aˆ16 June 2006.
- Szadkowski, Bartomiej ,Chrzan, Piotr , Roye, Danie (2003). A study of energy requirements for electric and hybrid vehicles in cities. Proceedings of the 2003 International Conference on Clean, Efficient and Safe Urban Transport.
- https://afdc.energov/vehicles/how-do-fuel-cell-electric-cars-work
- OfferJ Howey, D. Contestabile, M. Clague, R.Brandon, N.P. Compar- ative analysis of battery electric, hydrogen fuel cell and hybrid vehicles in a future sustainable road transport system. Energy Policy 2010, 38, 24aˆ29.
- Jenal, E. Sulaiman, M. F. Omar, G. M. Romalan and H. A. Soomro, ”Development of a novel permanent magnet flux switching machine proto- type for light weight electric vehicles,” 2015 IEEE Student Conference on Research and Development (SCOReD), Kuala Lumpur, 2015, pp. 739-744, doi: 10.1109/SCORED.2015.7449436.
Journal of Nuclear Engineering & Technology
Volume | 14 |
Issue | 01 |
Received | February 26, 2024 |
Accepted | May 24, 2024 |
Published | June 11, 2024 |