Anjali Roy,
Guru Krishna Prasad S L,
Rithvin R Prasad,
Rinku R S,
- Student Electrical and Electronics Engineering, UKF College of Engineering and Technology, Kollam Kerala India
- Student Electrical and Electronics Engineering, UKF College of Engineering and Technology, Kollam Kerala India
- student Electrical and Electronics Engineering, UKF College of Engineering and Technology, Kollam Kerala India
- Assistant professor Electrical and Electronics Engineering, UKF College of Engineering and Technology, Kollam Kerala India
Abstract
Addressing fuel shortages stands as one of the most critical global challenges today, alongside the significant issue of water scarcity for both urban and rural populations. A considerable portion, around 60-70%, of the country’s electricity demand is fulfilled by burning wood and agricultural waste. Solar energy is the most abundant renewable energy on earth which doesn’t pollute the environment while producing the energy. Solar power, harnessing renewable energy from gentle solar radiation, holds immense potential. Transitioning from petroleum-based energy to electric energy is pivotal for advancing renewable sources. Solar energy has evolved into a sustainable energy choice, urging an expansion in its utilization. Particularly in dusty regions like tropical nations such as India, solar photovoltaic (PV) panels are extensively deployed. However, dust accumulation on these panels hampers their efficiency by obstructing sunlight, reducing electricity generation by up to 50% if left uncleaned for a month. The goal of this project is to argument robotic technology and WiFi connection to design, develop, and deploy a fully autonomous solar panel cleaning system. The primary aim is to tackle the decline in solar panel efficiency as a result of collecting particles. It aims to create a sophisticated cleaning robot capable of independent operation. Integrated with WiFi, the system allows remote monitoring, control, and scheduling of cleaning processes. The breakthrough is in the way wireless technologies and automated machines are seamlessly combined to improve solar panel performance and maintenance while guaranteeing peak energy production.
Keywords: Photovoltaic, renewable energy, robot, solar power
[This article belongs to Journal of Mechatronics and Automation(joma)]
Browse Figures
References
- Sorndach, N. Pudchuen and P. Srisungsitthisunti, “Rooftop Solar Panel Cleaning Robot Using Omni Wheels,” 2018 2nd International Conference on Engineering Innovation (ICEI), Bangkok, Thailand, 2018, pp. 7-12, doi: 10.1109/ICEI18.2018.8448530.
- K. Thomas, S. Joseph, T. S. Sarrop, S. B. Haris and R. Roopak, “Solar Panel Automated Cleaning (SPAC) System,” 2018 International Conference on Emerging Trends and Innovations In Engineering And Technological Research (ICETIETR), Ernakulam, India, 2018, pp. 1-3, doi: 10.1109/ICETIETR.2018.8529032.
- Al Baloushi, M. Saeed, S. Marwan, S. AlGghafri and Y. Moumouni, “Portable robot for cleaning photovoltaic system” 2018 Advances in Science and Engineering Technology International Conferences (ASET), Dubai, Sharjah, Abu Dhabi, United Arab Emirates, 2018, pp. 1-4, doi: 10.1109/ICASET.2018.8376781.
- Santosh Kumar, S. shankar and K. Murthy, “Solar Powered PV Panel Cleaning Robot,” 2020 International Conference on Recent Trends on Electronics, Information, Communication & Technology (RTEICT), Bangalore, India, 2020, pp. 169-172, doi: 10.1109/RTEICT49044.2020.9315548.
- Priya, K. S. Radha and M. Karthikeyan, “Design of Bluetooth-based Solar Panel Cleaner Robot,” 2023 7th International Conference on Computing Methodologies and Communication (ICCMC), Erode, India, 2023, pp. 1611-1616, doi: 10.1109/ICCMC56507.2023.10084178.
- Keennon, K. Klingebiel, and H. Won, ‘‘Development of the Nano Hummingbird: A tailless flapping wing micro air vehicle,’’ in Proc. 50thAIAA Aerosp. Sci. Meeting Including New Horizons Forum Aerosp. Expo. Jan. 2012, p. 588.
- Farrell Helbling and R. J. Wood, ‘‘A review of propulsion, power, and Control architectures for insect-scale flapping-wing vehicles,’’ Appl. Mech.Rev., vol. 70, no. 1, Jan. 2018, Art. No. 010801, doi: 10.1115/1.4038795.
- H. Dickinson, F.-O. Lehmann, and S. P. Sane, ‘‘Wing rotation and the aerodynamic basis of insect flight,’’ Science, vol. 284, no. 5422, pp. 1954–1960, 1999, doi: 10.1126/SCIENCE.284.5422.1954.
- J. Wood, ‘‘The first take-off of a biologically inspired at-scale robotic Insect,’’ IEEE Trans. Robot., vol. 24, no. 2, pp. 341–347, Apr. 2008, doi:10.1109/TRO.2008.916997.
- T. Jafferis, E. F. Helbling, M. Karpelson, and R. J. Wood, ‘‘Untethered Flight of an insect-sized flapping-wing microscale aerial vehicle,’’ Nature, Vol. 570, no. 7762, pp. 491–495, Jun. 2019, doi: 10.1038/s41586-019-1322-0.
- Lentink and M. H. Dickinson, ‘‘Rotational accelerations stabilize lead-Ing edge vortices on revolving fly wings,’’ J. Experim. Biol., vol. 212, No. 16, pp. 2705–2719, Aug. 2009, doi: 10.1242/JEB.022269.
- Piccoli and M. Yim, ‘‘Piccolissimo: The smallest micro aerial vehicle, ’In Proc. IEEE Int. Conf. Robot. Autom. (ICRA), May 2017, pp. 3328–3333, Doi: 10.1109/ICRA.2017.7989378.
- K.-C. Liu, J. Friend, and L. Yeo, ‘‘A brief review of actuation at the micro-scale using electrostatics, electromagnetics and piezoelectric Ultrasonic,’’ Acoust. Sci. Technol., vol. 31, no. 2, pp. 115–123, 2010, doi:10.1250/AST.31.115.
- Mashimo and S. Izuhara, ‘‘Review: Recent advances in Micromotors,’’ IEEE Access, vol. 8, pp. 213489–213501, 2020, doi:10.1109/ACCESS.2020.3041457.
- Inoue, B. Shen, and A. Takeuchi, ‘‘Developments and applications of bulk glassy alloys in late transition metal base system,’’ Mater.Trans. vol. 47, no. 5, pp. 1275–1285, 2006, doi: 10.2320/MATER-TRANS.47.1275.
- S. N. Trimmer, ‘‘Micro robots and micromechanical systems, ‘Sens. Actuators, vol. 19, no. 3, pp. 267–287, 1989, doi: 10.1016/02506874(89)87079-9.
- Drexler, Nano systems: Molecular Machinery, Manufacturing, and Computation. Hoboken, NJ, USA: Wiley, 1992.
- Dermitzakis, J. P. Carbajal, and J. H. Marden, ‘‘Scaling laws in Robotics,’’ Proc. Compute. Sci., vol. 7, pp. 250–252, Jan. 2011, doi, 10.1016/j.procs.2011.09.038.
- -S. Fan, Y.-C. Tai, and R. S. Müller, ‘‘IC-processed electrostatic Micromotors,’’ Sens. Actuators, vol. 20, nos. 1–2, pp. 41–47, 1989, doi:10.1016/025 6874(89)87100-8.
- C. Jacobsen, R. H. Price, J. E. Wood, T. H. Rytting, and M. Rafael of, ‘The wobble motor: Design, fabrication and testing of an eccentric-motion Electrostatic micro actuator,’’ in Proc. Int. Conf. Robot. Autom. May 1989, pp. 1536–1546, doi,10.1109/ROBOT.1989.100197.
Journal of Mechatronics and Automation
Volume | 11 |
Issue | 02 |
Received | May 20, 2024 |
Accepted | July 9, 2024 |
Published | August 24, 2024 |