Jai Narvekar,
Puja Sutar,
Aditya Dhembare,
Umesh Shingate,
Siddhsh More,
- Assistant Professor, Singhad College of Engineering, Pune, Maharashtra, India
- Student, Singhad College of Engineering, Pune, Maharashtra, India
- Student, Singhad College of Engineering, Pune, Maharashtra, India
- Student, Singhad College of Engineering, Pune, Maharashtra, India
- Student, Singhad College of Engineering, Pune, Maharashtra, India
Abstract
Abstract
This study aims to comprehensively investigate the performance of Savonius rotor wind turbines through a combination of numerical simulations and experimental testing. Initially, 3-dimensional CAD software Solidworks and ANSYS will be utilized to design detailed models of the turbines. Numerical meshes will then be generated around these models using FLUENT software, incorporating the k-ε turbulence model to simulate fluid flow fields. Parameters such as drag coefficient, lift coefficient, pressure contours, velocity contours, and torque coefficient will be determined across various wind speeds. Subsequently, numerical power coefficients will be calculated based on the torque coefficients obtained. Additionally, scale models of Savonius rotor wind turbines will be designed and fabricated, optimized for blade numbers and shapes. Experimental measurements of torque in front of the turbines will be conducted using dynamic torque sensors at different wind speeds, allowing for the calculation of torque and power coefficients from empirical data. Finally, a comparative analysis between numerical and experimental results will be carried out to assess the accuracy and reliability of the simulations.
Keywords: Windmill, CAD, fossil fuel reservoir, Savonius Types Vawts, wind energy.
[This article belongs to Journal of Aerospace Engineering & Technology(joaet)]
References
- Belmili, R. Cheikh, T. Smail, N. Seddaoui,R.W. Biara,”Design and Analysis of a Permanent Magnetic Beearing for Vertical Axis Small Wind Turbine for urban architecture,” ICEER 2017, 17-20 July 2017.
- Abdul Latif Manganhar, Altaf Hussain Rajpar, Muhammad Ramzan Luhur, Saleem Raza Samo, Mehtab Manganhar, “Performance Analysis of a Savonius Vertical Axis Wind Turbine Integrated with Wind Accelerating and Guiding Rotor House,” Renewable energy an international journal, vol-132, March-2019.
- Rakesh Kumara, Kaamran Raahemifarb, Alan S. Funga, “A critical review of vertical axis wind turbines for urban applications,” Renewable and Sustainable Energy Reviews 89 pp.281–291 2018.
- M. Joselin Herberta, S. Iniyanb,_, E. Sreevalsanc, S. Rajapandiand ―A review of wind energy technologies‖; Department of Mechanical Engineering, St. Joseph’s College of Engineering, Chennai-119, India
- Pope, I. Dincer, G.F. Naterer ―Energy and exergy efficiency comparison of horizontal and vertical axis wind turbines‖ Faculty of Engineering and Applied Science, University of Ontario Institute of Technology, 2000 Simcoe Street North, Oshawa, Ontario, Canada
- Robert Howell, Ning Qin, Jonathan Edwards, Naveed Durrani ―Wind tunnel and numerical study of a small vertical axis wind turbine‖ Department of Mechanical Engineering, University of Sheffield, Sir Frederick Mappin Building, Mappin Street, Sheffield, UK
- Stathopoulos T, Alrawashdeh H, Al-Quraan A, Blocken B, Dilimulati A, Paraschivoiu M, Pilay P. Urban wind energy: Some views on potential and challenges. Journal of Wind Engineering and Industrial Aerodynamics. 2018 Aug 1;179:146-57.
- Dutton AG, Halliday JA, Blanch MJ. The feasibility of building-mounted/integrated wind turbines (BUWTs): Achieving their potential for carbon emission reductions. Energy Research Unit, CCLRC. 2005 May 4:77-83.
- Garcia O, Ulazia A, del Rio M, Carreno-Madinabeitia S, Gonzalez-Arceo A. An Energy Potential Estimation Methodology and Novel Prototype Design for Building-Integrated Wind Turbines. Energies. 2019 May 27;12(10):2027.
- Micallef D, Van Bussel G. A review of urban wind energy research: aerodynamics and other challenges. Energies. 2018 Aug 23;11(9):2204.
Journal of Aerospace Engineering & Technology
Volume | 14 |
Issue | 02 |
Received | July 8, 2024 |
Accepted | July 17, 2024 |
Published | August 16, 2024 |