Effects of Nano B4C Addition on the Solidification Behavior of Al-2219 Alloy Composites

Year : 2024 | Volume :02 | Issue : 01 | Page : 31-38
By

Amit Bhumarker Singh

Abhishek Singh

  1. Assistant Professor Department of Mechanical Engineering, Annie Institute of Technology & Research Centre, Chhindwara Madhya Pradesh India
  2. Assistant Professor Department of Mechanical Engineering, Annie Institute of Technology & Research Centre, Chhindwara Madhya Pradesh India

Abstract

The inclusion of nano B4C particulates in Al-2219-Nano B4C alloy was investigated to understand their impact on hardness and wear characteristics. 500 nm-sized nano B4C particulates are used as reinforcements for structures in the Al2219 alloy matrix. The nanocomposites were fabricated using the two-stage liquid stir melt method with varying weight percentages (2, 4, 6, and 8 wt. %) of Nano B4C in the Al-2219 alloy matrix. Renewable energy dispersive spectroscopy (EDS) and a scanning electron microscope (SEM) were used for analyzing the specimens’ microstructure. Hardness and wear strength were assessed in accordance with ASTM standards. The even distribution of nano B4C particles in the Al-2219 alloy was confirmed by SEM images and confirmed by EDS analysis. Moreover, the base Al-2219 alloy’s the toughness and wear vitality were enhanced by the addition of nano B4C particles.

Keywords: Al-2219 alloy matrix, scanning electron microscope, energy dispersive spectroscope, nano B4C particles, liquid stir melt method, hardness, wear strength

[This article belongs to International Journal of Manufacturing and Production Engineering(ijmpe)]

How to cite this article: Amit Bhumarker Singh, Abhishek Singh. Effects of Nano B4C Addition on the Solidification Behavior of Al-2219 Alloy Composites. International Journal of Manufacturing and Production Engineering. 2024; 02(01):31-38.
How to cite this URL: Amit Bhumarker Singh, Abhishek Singh. Effects of Nano B4C Addition on the Solidification Behavior of Al-2219 Alloy Composites. International Journal of Manufacturing and Production Engineering. 2024; 02(01):31-38. Available from: https://journals.stmjournals.com/ijmpe/article=2024/view=148068

Browse Figures

References

  1. Z Hassan, Z Mohammad, RT Mohammad et al. “Compressive, Shear, and Fracture Behavior of CNT Reinforced Al Matrix Composites Manufactured by Severe Plastic Deformation.” Materials & Design 106 (2016): 112–19. https://doi.org/10.1016/j.matdes.2016.05.109.
  2. Patidar D, Rana R. “Effect of B4C Particle Reinforcement on the Various Properties of Aluminium Matrix Composites: A Survey Paper,” Materials Today Proceedings 4 (2017): 2981–88. https://doi.org/10.1016/j.matpr.2017.02.180
  3. Suhas S, Quadros J, Vaishak N. “Evaluation and Characterization of Tensile Properties of Short Coated Carbon Fiber Reinforced Aluminium7075 AlloyMetal Matrix Composites via Liquid Stir Casting Method.” Material Science Research India 13(2) (2016): 66–73. https://doi.org/10.13005/msri/130202
  4. Vijaya Ramnath B, Elanchezhian C, Jaivignesh M et al. “Evaluation of Mechanical Properties of Aluminium Alloy-Alumina-Boron Carbide Metal Matrix Composites.” Materials and Design 58 (2014): 332–38. https://doi.org/10.1016/j.matdes.2014.01.068
  5. Nagaral M, Pavan R, Shilpa P et al. “Tensile Behavior of B4C Particulate Reinforced Al2024 Alloy Metal Matrix Composites.” FME Transactions 45(1) (2017): 93–96. https://doi.org/10.5937/fmet1701093N
  6. Leiblich et al. “Subsurface Modifications in Powder Metallurgy Aluminium Alloy Composites Reinforced with Intermetallic MoSi2 Particles under Dry Sliding Wear.” Wear 309(1-2) (2013): 126–33. https://doi.org/10.1016/j.wear.2013.11.012
  7. A Baradeswaran, E Elayaperumal. “Effect of Graphite Content on Tribological Behaviour of Aluminium Alloy Graphite Composite.” European Journal of Scientific Research 53(2) (2011): 163–70.
  8. R Harichandran, N Selvakumar. “Effect of Nano/Micro B4C Particles on the Mechanical Properties of Aluminium Metal Matrix Composites Fabricated by Ultrasonic Cavitation Assisted Solidification Process.” Archives of Civil and Mechanical Engineering 16 (2016): 147–58. https://doi.org/10.1016/j.acme.2015.07.001
  9. N Yuvaraj, S Aravindan, Vipin. “Fabrication of Al5083/B4C Surface Composite by Friction Stir Processing and Its Tribological Characterization.” Journal of Materials Research and Technology 4 (4) (2015): 398–410. https://doi.org/10.1016/j.jmrt.2015.02.006
  10. N Nagaraj, KV Mahendra, M Nagaral. “Microstructure and Evaluation of Mechanical Properties of Al-7Si Flyash Composites.” Materials Today Proceedings 5(1) (2018): 3109–16. https://doi.org/10.1016/j.matpr.2018.01.116
  11. Madeva Nagaral et al. “Studies on 3 and 9 Wt. % B4C Particulates Reinforced Al7025 Alloy Composites.” AIP Conference Proceedings 1859, 020019 (2017).
  12. Meijuanli AB, KakaMa C, LinJiang BC et al. “Synthesis and Mechanical Behavior of Nanostructured Al5083/n-TiB2 Metal Matrix Composites.” Materials Science and Engineering A 656 (2016): 241–48. https://doi.org/10.1016/j.msea.2016.01.031
Regular Issue Subscription Review Article
Volume 02
Issue 01
Received April 22, 2024
Accepted May 11, 2024
Published May 28, 2024
Views: 37