Journal of Polymer and Composites

ISSN: 2321–2810

Editors Overview

jopc maintains an Editorial Board of practicing researchers from around the world, to ensure manuscripts are handled by editors who are experts in the field of study.

Publications

(1125)










Regular Issue  Subscription Review Article Published on :- 22-Jul-2023

Electro Less Duplex Nickel Coating and Tribological Characterization Under Elevated Temperature

By  
Rajarshi Chakraborty, Arka Bhattarcharjee, Sourav Dey, Subhadip Maity, Amrita Pradhan,
Abstract : Electroless Ni-P (EN) coatings had previously demonstrated their ability to improve the tribological properties of the underlying substantial. This is read more

[This section belongs to International Journal of Electro-Mechanics and Material Behavior (ijemb)]










Special Issue  Open Access Original Research Published on :- 14-Feb-2023

A Smart Investigation on Nanocomposites Composed of Carbon Dioxide-Derived, Repeatable Biological Polymers

By  
Dr. Chakrapani I S,
Abstract : In recent years, an increasing number of people have begun to focus their attention on the environmental impacts that are caused by the widespread use read more

[This section belongs to Journal of Polymer and Composites (jopc)]










Special Issue  Open Access Original Research Published on :- 14-Feb-2023

Synthesis, Properties, Nanocomposites, and Electrochemical Applications of Polyaniline: A Review

By  
Dr. Dayawati,
Abstract : Polyaniline, also known as PANI, is a polymer in the that is becoming more significant for academics in the field of nanotechnology due to the read more

[This section belongs to Journal of Polymer and Composites (jopc)]










Special Issue  Open Access Original Research Published on :- 15-Sep-2023

Fractal Analysis of Vertical Component of VLF Electric Field Related to Major Shallow Earthquakes (5.5 < M ≤ 5.9, depth ˂ 10 km) occurred in Indian Ocean and China

By  
Raj Pal Singh,
Abstract : Recording of amplitude of vertical component of VLF electric field is continued at Chaumuhan, Mathura (27.5° N, 77.68° E) at the frequency f = 3.012 read more

[This section belongs to Journal of Polymer and Composites (jopc)]










Special Issue  Open Access Original Research Published on :- 15-Sep-2023

Revealing the Effect of Swift Carbon Ion Beam on Radiation Sensitivity of Radio-frequency Magnetron Sputtered Grown Alumina Thin Films

By  
Aloke Kanjilal,
Abstract : Regarding targeted treatment, hadron therapy is beneficial than conventional radiotherapy based on X rays/gamma rays due to characteristic energy loss read more

[This section belongs to Journal of Polymer and Composites (jopc)]










Special Issue  Open Access Original Research Published on :- 12-Sep-2023

Evaluation of Patient-Specific Quality Assurance for RapidArc Treatment Delivery Using Dose Volume Histogram

By  
Sumanta Manna,
Abstract : This study aims to evaluate the application of dose volume histogram (DVH) metrics within the patient-specific quality assurance (PSQA) protocol in read more

[This section belongs to Journal of Polymer and Composites (jopc)]










Special Issue  Open Access Original Research Published on :- 12-Sep-2023

Breakup Fusion of 18O with 144Sm

By  
Dharmendra Singh,
Abstract : Excitation function measurements have been done for the evaporation residues populating in the system 18O +144Sm. For this purpose, the stacked foil read more

[This section belongs to Journal of Polymer and Composites (jopc)]










Special Issue  Open Access Original Research Published on :- 25-Sep-2023

Kaniadakis Holographic Dark Energy by Using Hybrid Scale Factor

By  
Benoy Kumar Singh,
Abstract : We carry out the work on Kaniadakis holographic dark energy KHDE with hybrid expansion law by taking the scale factor containing both exponent and read more

[This section belongs to Journal of Polymer and Composites (jopc)]










Special Issue  Open Access Original Research Published on :- 25-Sep-2023

Dispersion Analysis of TE Modes in 1D Magnetized Ferrite Photonic Crystals for Tunable and Switchable Band Gap Filtering Device Applications under Transverse Magnetization Configuration

By  
Dr. Yogesh Sharma,
Abstract : The article comprehensively explores the dispersion characteristics exhibited by TE modes within one-dimensional magnetized ferrite photonic crystals, read more

[This section belongs to Journal of Polymer and Composites (jopc)]










Special Issue  Open Access Original Research Published on :- 22-Sep-2023

Fabrication and Characterization of Zinc-based Alloy for Bio-implants

By  
Toshit Jain,
Abstract : Zinc-based alloys are potential biodegradable implants and can replace Magnesium and Titaniumbased materials via engineering their biomechanical read more

[This section belongs to Journal of Polymer and Composites (jopc)]










Special Issue  Open Access Original Research Published on :- 20-Sep-2023

A Comparative Study of Zinc Oxide Nano Particles Synthesized by Hydrothermal, Sol-gel and Thermal Decomposition

By  
Nudrat Jahan,
Abstract : In the proposed work, Zinc oxide nano particles (ZnO NP’s) are synthesized using three different methods: Hydrothermal, Sol-gel and Thermal read more

[This section belongs to Journal of Polymer and Composites (jopc)]

International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)










Conference  Open Access Original Research Published on :- 22-Sep-2023

Corrosion Characterisation of Low Alloy CrMoV Steel Before and After Cryogenic Heat Therapy

By  
S SARVESWARA REDDY,
Abstract : Low alloy CrMoV steel is used in Turbine wheels, Distance pieces, Compressor aft shafts etc of Gas Turbines. Cryogenic heat treatment was used to read more

[This section belongs to Journal of Polymer and Composites (jopc)]

International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)










Conference  Open Access Original Research Published on :- 22-Sep-2023

Numerical Analysis and Comparison of Various Cross Sections of Heat Pipes in Heat Exchanger

By  
GADIPELLY BHASKAR,
Abstract : The present work describes about numerical analysis of heat pipe with different cross sections such as L-shape, U-shape, wave and spring read more

[This section belongs to Journal of Polymer and Composites (jopc)]

International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)










Conference  Open Access Original Research Published on :- 22-Sep-2023

Liquid-Cooled Battery Thermal Management System: A Numerical Investigation of Effect of Coolant Path and Flow Rate Optimization

By  
Giphin George,
Abstract : Battery thermal management system (BTMS) is crucial for ensuring the safety and performance of battery packs in electric vehicles. Liquid cooling is read more

[This section belongs to Journal of Polymer and Composites (jopc)]

International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)










Conference  Open Access Original Research Published on :- 22-Sep-2023

Numerical Analysis of Battery Thermal Management Using Phase Change Material Concerning Melting Fraction and Temperature

By  
Mr. Potluri sai Kiran,
Abstract : This work, analysis and simulates a phase change material melting for battery thermal management (BTM). Phase change materials (PCM) are the read more

[This section belongs to Journal of Polymer and Composites (jopc)]

International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)










Conference  Open Access Review Article Published on :- 22-Sep-2023

Review of Post-consumer Plastics and Pyrolysis Technology

By  
Bhargav Angadala, Karimulla Syed, V.L. Mangesh, Murali G,
Abstract : In both industrial and residential products, synthetic polymers are widely used. Since synthetic polymers are made from fossil fuels, they cannot read more

[This section belongs to Journal of Polymer and Composites (jopc)]

International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)










Conference  Open Access Original Research Published on :- 22-Sep-2023

Numerical Simulation of Transient Free Convection in a Rectangular Cavity Filled with Porous Material Using Finite Element Formulations

By  
Lokesh Kumar Sharma,
Abstract : In this study, the finite element method is used to quantitatively explore transient free convection in porous cavities in order to understand the read more

[This section belongs to Journal of Polymer and Composites (jopc)]

International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)










Conference  Open Access Original Research Published on :- 22-Sep-2023

Topology Optimization of Press Tools for Additive Manufacturing: Reducing Manufacturing Time

By  
Vaibhav Kanojia,
Abstract : This research paper presents a topology optimization study of a press tool consisting of a punch and a die, with the aim of optimizing the press tool read more

[This section belongs to Journal of Polymer and Composites (jopc)]

International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)










Conference  Open Access Original Research Published on :- 22-Sep-2023

Prediction and Comparative Analysis of Thermal Conductivity of Jatropha Oil-based Hybrid Nanofluid by Multivariable Regression and ANN

By  
Amol J. Asalekar, D.V.A. Rama Sastry,
Abstract : In the present study, a multivariable regression (MR) and artificial neural network (ANN) method was used to predict the thermal conductivity of read more

[This section belongs to Journal of Polymer and Composites (jopc)]

International Conference on Innovative Concepts in Mechanical Engineering (ICICME – 2023)










Conference  Open Access Original Research Published on :- 22-Sep-2023

Effect of Fillet Radius on Bending Stress in Helical Gear using FEA

By  
Hardial Singh,
Abstract : A well-optimized change in root fillet radius could greatly benefit helical gear operation by providing a smoother transmission with less impact and read more

[This section belongs to Journal of Polymer and Composites (jopc)]