Analysis of Crashworthiness of a Saloon Car Fitted with CNG Cylinder

[267]; Shivam; Sanskar Sogani; Sarthak Mishra; Tushar Tanvar; Vijay Gautam; Devendra Kumar; [267]; Kamal Kant Singh; Dharamvir Mangal; [267]; Akash Sinha; M. Zunaid; Afzal Husain; [267]; Srijan Bansal; Vijay Gautam; Ved Prakash; [267]; Numan Siddique Mazumder; Pradip Lingfa; Asis Giri; [267]; Anil Kumar; Ravi Kant; [267]; Alok Singh; Savita Singh; Sudhir K Sharma; [267]; Ranjan Kumar; Sumanta Jungli; Somnath Das; Arijit Mukherjee; Soumya Ghosh; [267]; Amit Pal; Manish Mishra; Amrish K. Panwar; [267]; Shivam Singh; S.K.S. Yadav; [267]; Anil Kumar; Ankit; [267]; Nanak Ram; Vijay Gautam; [267]; Gaurav Kumar; Aryan Tyagi; Raj Kumar Singh

Journal of Polymer and Composites

ISSN: 2321–2810

Journal Menu

Editors Overview

jopc maintains an Editorial Board of practicing researchers from around the world, to ensure manuscripts are handled by editors who are experts in the field of study.

Publications

(13)

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 19-Jan-2023

Analysis of Crashworthiness of a Saloon Car Fitted with CNG Cylinder

Shivam, Sanskar Sogani, Sarthak Mishra, Tushar Tanvar, Vijay Gautam, Devendra Kumar,

Abstract : There is an increase in demand for compressed natural gas vehicles in India. Due to the high gasoline prices and lack of electric vehicle read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 19-Jan-2023

Studies on the Influence of Squeezed Stir Casting Parameters on the Strengthening Properties of AZ91Mg Alloy

Kamal Kant Singh, Dharamvir Mangal,

Abstract : In this research, optimum squeeze stir casting parameters of AZ91 Mg alloy has been investigated by considering its strengthening properties. Melting read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 19-Jan-2023

Numerical Study and Comparison of Passive Mixing in Helical Micromixers

Akash Sinha, M. Zunaid, Afzal Husain,

Abstract : A passive mixing inside three micromixers has been studied with water as the mixing fluid. Since the mixing at the micro-level is governed by species read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 19-Jan-2023

Numerical Studies on Deep Drawability of the Aluminium Alloy, AA6082 and Parameters Affecting It

Srijan Bansal, Vijay Gautam, Ved Prakash,

Abstract : Deep drawing is a metal forming operation used for manufacturing sheet-metal components for application in the automobile, aerospace, and packaging read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 19-Jan-2023

Effect of Initial Temperature and Diameter of Ethanol Droplet on Evaporation Dynamics in Convective Air Medium

Numan Siddique Mazumder, Pradip Lingfa, Asis Giri,

Abstract : Ethanol is a suitable biofuel as it has fewer toxic emissions and higher-octane numbers. For spray combustion applications, the gas phase motion must read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 19-Jan-2023

Empirical Relation to Predict Essential Oil Yield in Conventional Distillation System

Anil Kumar, Ravi Kant,

Abstract : Peppermint is medicinal herb, and its extracts (essential oils) are of great importance because they are used in pharmaceutical, food, and cosmetic read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 19-Jan-2023

Experimental Analysis of Nano-carbon Doped Alumina for Industrial Applications

Alok Singh, Savita Singh, Sudhir K Sharma,

Abstract : The use of nano-carbon metal matrix composites can provide a solution to the enduring issue of optimal material selection and optimization for getting read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 19-Jan-2023

Experimental Analysis of Cutting Forces Under Different Machining Parameters and Carbide Inserts During Turning of Hardened AISI 4340 Steel

Ranjan Kumar, Sumanta Jungli, Somnath Das, Arijit Mukherjee, Soumya Ghosh,

Abstract : Turning of hardened materials with an advanced coated carbide insert has numerous advantages over the grinding process, e.g., reduced process cost, read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 23-Jan-2023

Hybrid Supercapacitor Application for Future E-mobility

Amit Pal, Manish Mishra, Amrish K. Panwar,

Abstract : With the rise in demand for automobiles, there is an increase in pollution levels and global warming since the past decade, there is a strong need for read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 23-Jan-2023

Parametric Study of Fused Deposition Modelling Process During Fabrication of Acrylonitrile Butadiene Styrene (ABS) Based Injection Molding Die

Shivam Singh, S.K.S. Yadav,

Abstract : The purpose of this study is to dictate an optimum process parameter during the fabrication of additively manufactured acrylonitrile butadiene styrene read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 23-Jan-2023

Techno-economic Assessment of a Domestic Refrigerator with Aluminium-based Suction Line and Capillary Tube

Anil Kumar, Ankit,

Abstract : The present work reports the experimental performance evaluation of aluminum suction line-based domestic refrigerators. Furthermore, it compared read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 23-Jan-2023

Characterization of Fracture Toughness of As-Cast Si-Mo- Cr Ductile Cast Iron

Nanak Ram, Vijay Gautam,

Abstract : In the present study, a Si-Mo-Cr ductile cast iron is developed by taking three different combinations, viz. Heat-1, Heat-2 and Heat-3 of the read more

[This section belongs to Journal of Polymer and Composites (jopc)]

RAMMTE-2022: Recent Advances in Materials, Manufacturing and Thermal Engineering

Conference Open Access Original Research Published on :- 31-Jan-2023

Thermal-hydraulic Behaviour of Corrugated Pipe Configurations

Gaurav Kumar, Aryan Tyagi, Raj Kumar Singh,

Abstract : Heat exchangers have a wide range of applications and can be found in a variety of different industries, including chemical reactors, nuclear power read more

[This section belongs to Journal of Polymer and Composites (jopc)]

Not A Member?

Join Us

Submit Manuscript

Submit Topics

Initiatives

Guidelines For

Further Information

Corporate Office

STM Journals,
An imprint of Consortium E-learning network Pvt. Ltd.
A-118, 1st Floor, Sector-63, Noida, U.P. India,
Pin-201301
(Tel) (+91) 0120- 4781 200
(Mob) (+91) 9810078958, +919667725932
E-mail: [email protected]

WEBSITE DISCLAIMER

Last updated: 2022-06-15

The information provided by STM Journals (“Company”, “we”, “our”, “us”) on https://journals.stmjournals.com/ (the “Site”) is for general informational purposes only. All information on the Site is provided in good faith, however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the Site.

UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR RELIANCE ON ANY INFORMATION PROVIDED ON THE SITE. YOUR USE OF THE SITE AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE IS SOLELY AT YOUR OWN RISK.

EXTERNAL LINKS DISCLAIMER

The Site may contain (or you may be sent through the Site) links to other websites or content belonging to or originating from third parties or links to websites and features. Such external links are not investigated, monitored, or checked for accuracy, adequacy, validity, reliability, availability, or completeness by us.

WE DO NOT WARRANT, ENDORSE, GUARANTEE, OR ASSUME RESPONSIBILITY FOR THE ACCURACY OR RELIABILITY OF ANY INFORMATION OFFERED BY THIRD-PARTY WEBSITES LINKED THROUGH THE SITE OR ANY WEBSITE OR FEATURE LINKED IN ANY BANNER OR OTHER ADVERTISING. WE WILL NOT BE A PARTY TO OR IN ANY WAY BE RESPONSIBLE FOR MONITORING ANY TRANSACTION BETWEEN YOU AND THIRD-PARTY PROVIDERS OF PRODUCTS OR SERVICES.

PROFESSIONAL DISCLAIMER

The Site can not and does not contain medical advice. The information is provided for general informational and educational purposes only and is not a substitute for professional medical advice. Accordingly, before taking any actions based on such information, we encourage you to consult with the appropriate professionals. We do not provide any kind of medical advice.

Content published on https://journals.stmjournals.com/ is intended to be used and must be used for informational purposes only. It is very important to do your analysis before making any decision based on your circumstances. You should take independent medical advice from a professional or independently research and verify any information that you find on our Website and wish to rely upon.

THE USE OR RELIANCE OF ANY INFORMATION CONTAINED ON THIS SITE IS SOLELY AT YOUR OWN RISK.

AFFILIATES DISCLAIMER

The Site may contain links to affiliate websites, and we may receive an affiliate commission for any purchases or actions made by you on the affiliate websites using such links.

TESTIMONIALS DISCLAIMER

The Site may contain testimonials by users of our products and/or services. These testimonials reflect the real-life experiences and opinions of such users. However, the experiences are personal to those particular users, and may not necessarily be representative of all users of our products and/or services. We do not claim, and you should not assume that all users will have the same experiences.

YOUR RESULTS MAY VARY.

The testimonials on the Site are submitted in various forms such as text, audio, and/or video, and are reviewed by us before being posted. They appear on the Site verbatim as given by the users, except for the correction of grammar or typing errors. Some testimonials may have been shortened for the sake of brevity, where the full testimonial contained extraneous information not relevant to the general public.

The views and opinions contained in the testimonials belong solely to the individual user and do not reflect our views and opinions.

ERRORS AND OMISSIONS DISCLAIMER

While we have made every attempt to ensure that the information contained in this site has been obtained from reliable sources, STM Journals is not responsible for any errors or omissions or the results obtained from the use of this information. All information on this site is provided “as is”, with no guarantee of completeness, accuracy, timeliness, or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability, and fitness for a particular purpose.

In no event will STM Journals, its related partnerships or corporations, or the partners, agents, or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information in this Site or for any consequential, special or similar damages, even if advised of the possibility of such damages.

GUEST CONTRIBUTORS DISCLAIMER

This Site may include content from guest contributors and any views or opinions expressed in such posts are personal and do not represent those of STM Journals or any of its staff or affiliates unless explicitly stated.

LOGOS AND TRADEMARKS DISCLAIMER

All logos and trademarks of third parties referenced on https://journals.stmjournals.com/ are the trademarks and logos of their respective owners. Any inclusion of such trademarks or logos does not imply or constitute any approval, endorsement, or sponsorship of STM Journals by such owners.

CONTACT US

Should you have any feedback, comments, requests for technical support, or other inquiries, please contact us by email: [email protected].