This is an unedited manuscript accepted for publication and provided as an Article in Press for early access at the author’s request. The article will undergo copyediting, typesetting, and galley proof review before final publication. Please be aware that errors may be identified during production that could affect the content. All legal disclaimers of the journal apply.
Rajiv Chauhan,
Chadetrik Rout,
- Associate Professor and Head, Department of Civil Engineering, Main Campus IKGPTU, Kapurthala-144603, Jalandhar, Punjab, India
- Associate Professor, Department of Civil Engineering, Maharishi Markandeshwar Engineering College, Maharishi Markandeshwar (Deemed to be University), Mullana-133207, Ambala, Haryana, India
Abstract
Ceramic Matrix Composites (CMCs) are materials that mix or fuse ceramic fibres with a ceramic matrix to synthesize a composite/compound. CMCs may be manufactured from a range of ceramic materials, including carbon, carbon fibers, silicon carbide, glass ceramic, alumina, etc. The CMC’s final qualities are determined by its production method and the type of filler employed. Recent breakthroughs in CMC technology have resulted in considerable performance gains, making them suitable for use in demanding areas such as aerospace, energy, biomedicine, etc. Manufacturing technique innovations, such as additive manufacturing and sophisticated sintering technologies, have made it easier to produce complex geometries and specialized characteristics, overcoming previous restrictions including brittleness and processing problems. Advances in nanotechnology and the use of nanomaterials have increased the mechanical strength as well as the thermal conductivity of CMCs, paving the path for the development of novel materials capable of responding to adverse environmental conditions. Likewise, composites that mix several reinforcing materials are evolving, with enhanced performance features. Nowadays as sustainability becomes more important, researchers are focussing on environmentally friendly production techniques and the use of renewable resources in CMC designs or preparation. This study emphasizes the revolutionary potential of CMCs and their significance in adopting and developing technology in industrial sectors. The innovations in CMC may offer not only to improve the performance but also a dedication to sustainable methods, setting them as a foundation for next-generation materials.
Keywords: CMCs, additive manufacturing, nanotechnology, aerospace, mechanical properties, energy, sustainability.
Rajiv Chauhan, Chadetrik Rout. Potential Applications of Ceramic Matrix Composites: Advancements, Benefits and Challenges. Journal of Polymer and Composites. 2025; 13(03):-.
Rajiv Chauhan, Chadetrik Rout. Potential Applications of Ceramic Matrix Composites: Advancements, Benefits and Challenges. Journal of Polymer and Composites. 2025; 13(03):-. Available from: https://journals.stmjournals.com/jopc/article=2025/view=206599
References
[1] Fan X, Yin X. Progress in research and development on matrix modification of continuous fiber-reinforced silicon carbide matrix composites. Adv. Compos. Hybrid Mater. 2018;1:685-95. https://doi.org/10.1007/s42114-018-0062-1
[2] Ramesh M, Selvan MT, Saravanakumar A. Evolution and recent advancements of composite materials in structural applications. In Applications of Composite Materials in Engineering 2025 Jan 1 (pp. 97-117). Elsevier Science Ltd. https://doi.org/10.1016/B978-0-443-13989-5.00004-8
[3] Sivasubramanian P, Mayandi K, Arumugaprabu V, et al. History of composites and polymers. In Polymer-based composites 2021 Aug 23 (pp. 1-21). CRC Press.
[4] Tite MS, Kilikoglou V, Vekinis G. Strength, toughness and thermal shock resistance of ancient ceramics, and their influence on technological choice. Archaeometry. 2001;43(3):301-24. https://doi.org/10.1111/1475-4754.00019
[5] Suzdal’tsev EI, Kharitonov DV, Anashkina AA. Analysis of existing radioparent refractory materials, composites and technology for creating high-speed rocket radomes. Part 4. Ceramic technology for producing glass ceramic radomes. Advantages and disadvantages. Prospects for modernization. Refract. Ind. Ceram. 2011;51(5):349-57. https://doi.org/10.1007/s11148-011-9324-y
[6] Gottlieb R, Poges S, Monteleone C, et al. Continuous fiber-reinforced ceramic matrix composites. J. Adv. Ceram. 2016 Aug 5:146-99.
[7] Lv X, Ye F, Cheng L, et al. Novel processing strategy and challenges on whisker-reinforced ceramic matrix composites. Compos. – A: Appl. Sci. Manuf. 2022;158:106974. https://doi.org/10.1016/j.compositesa.2022.106974
[8] Ho CY, El‐Rahaiby SK. Assessment of the status of ceramic matrix composites technology in the United States and abroad. In Proceedings of the 16th Annual Conference on Composites and Advanced Ceramic Materials: Ceramic Engineering and Science Proceedings 1994 Jan 1 (pp. 2-17). Hoboken, NJ, USA: John Wiley & Sons, Inc. https://doi.org/10.1002/9780470313954.ch1
[9] Spriet P. CMC applications to gas turbines. Ceramic matrix composites: Materials, Modeling and Technology. 2014:591-608. https://doi.org/10.1002/9781118832998.ch21
[10] Dubey D, Singh SP, Behera BK. Additive manufacturing of fiber-reinforced composites. J. Mater. Sci. 2024;59(27):12219-56. https://doi.org/10.1007/s10853-024-09925-6
[11] Shrivastava S, Rajak DK, Joshi T, et al. Ceramic matrix composites: Classifications, manufacturing, properties, and applications. Ceramics. 2024;7(2):652-79. https://doi.org/10.3390/ceramics7020043
[12] Liu J, Li W, Ricohermoso III E, et al. Temperature‐dependent mechanical and oxidation behavior of in situ formed ZrN/ZrO₂‐containing Si₃N₄‐based composite. J. Am. Ceram. Soc. 2023; 106(8):4931-43. https://doi.org/10.26083/tuprints-00024300
[13] Prewo KM, Brennan JJ. Fiber reinforced glasses and glass ceramics for high performance applications. Reference Book for Composites Technology. 1989;1:97-116.
[14] Balaji M, Thirumaran V, Kumarasamy G, et al. Studies on wear behavior of hybrid aluminum alloy (7075) reinforced with B₄C and BN. Mater. Today: Proc. 2023;72(4):2581-5. https://doi.org/10.1016/j.matpr.2022.11.030
[15] Huang LJ, Geng L, Peng HX. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?. Prog. Mater. Sci. 2015;71:93-168. https://doi.org/10.1016/j.pmatsci.2015.01.002
[16] Wu C, Luo Y, Cuniberti G, et al. Three-dimensional printing of hierarchical and tough mesoporous bioactive glass scaffolds with a controllable pore architecture, excellent mechanical strength and mineralization ability. Acta Biomater. 2011;7(6):2644-50. https://doi.org/10.1016/j.actbio.2011.03.009
[17] Valadez-Gonzalez A, Cervantes-Uc JM, Olayo RJ, et al. Effect of fiber surface treatment on the fiber–matrix bond strength of natural fiber reinforced composites. Compos. B Eng. 1999;30(3):309-20. https://doi.org/10.1016/S1359-8368(98)00054-7
[18] Wang C, Chen J, Liang S, et al. Microstructure evolution and mechanical properties of CuW/Al interface fabricated by infiltration and vacuum hot-pressing diffusion bonding. Vacuum. 2023;210:111882. https://doi.org/10.1016/j.vacuum.2023.111882
[19] Chatterjee S, Nafezarefi F, Tai NH, et al. Size and synergy effects of nanofiller hybrids including graphene nanoplatelets and carbon nanotubes in mechanical properties of epoxy composites. Carbon. 2012;50(15):5380-6. https://doi.org/10.1016/j.carbon.2012.07.021
[20] Jaganathan S, Kandasamy R, Venkatachalam R, et al. Advances in optimizing mechanical performance of 3D‐printed polymer composites: A microstructural and processing enhancements review. Adv. Polym. Technol. 2024;2024(1):3168252. https://doi.org/10.1155/2024/3168252
[21] Yavas D, Zhang Z, Liu Q, et al. Interlaminar shear behavior of continuous and short carbon fiber reinforced polymer composites fabricated by additive manufacturing. Compos. B Eng. 2021;204:108460. https://doi.org/10.1016/j.compositesb.2020.108460
[22] Berman D, Shevchenko E. Design of functional composite and all-inorganic nanostructured materials via infiltration of polymer templates with inorganic precursors. J. Mater. Chem. C. 2020;8(31):10604-27. https://doi.org/10.1039/D0TC00483A
[23] George G, Senthil T, Luo Z, et al. Sol-gel electrospinning of diverse ceramic nanofibers and their potential applications. InElectrospun Polymers and Composites 2021 Jan 1 (pp. 689-764). Woodhead Publishing. https://doi.org/10.1016/B978-0-12-819611-3.00022-4
[24] Zhang B, Jia L, Tian M, et al. Surface and interface modification of aramid fiber and its reinforcement for polymer composites: A review. Eur. Polym. J. 2021;147:110352. https://doi.org/10.1016/j.eurpolymj.2021.110352
[25] Karadimas G, Salonitis K. Ceramic matrix composites for aero engine applications-a review. Appl. Sci. 2023;13(5):3017. https://doi.org/10.3390/app13053017
[26] Goswami B, Sahay SK, Ray AK. Application of thermal barrier coatings on combustion chamber liners-A review. High Temp. Mater. Process. 2004;23(3):211-36. https://doi.org/10.1515/HTMP.2004.23.3.211
[27] Rashid AB, Haque M, Islam SM, et al. Breaking boundaries with ceramic matrix composites: A comprehensive overview of materials, manufacturing techniques, transformative applications, recent advancements, and future prospects. Adv. Mater. Sci. Eng. 2024;2024(1):2112358. https://doi.org/10.1155/2024/2112358
[28] Shifler D. Meeting materials needs in extreme naval corrosive and oxidative environments. Mater. High Temp. 2015;32(1-2):148-59. https://doi.org/10.1179/0960340915Z.000000000115
[29] Patel A, Sato E, Takagi T, et al. Effect of oxidation on the bending fatigue behavior of an advanced SiC/SiC CMC component at 1000° C in air. J. Eur. Ceram. Soc. 2022;42(10):4121-32. https://doi.org/10.1016/j.jeurceramsoc.2022.03.061
[30] Li L. Durability of ceramic-matrix composites. Woodhead Publishing, United Kingdom; 2020 Feb 7.
[31] Krenkel W. Carbon fiber reinforced CMC for high‐performance structures. Int. J. Appl. Ceram. Technol. 2004;1(2):188-200. https://doi.org/10.1111/j.1744-7402.2004.tb00169.x
[32] Sethi S, Ray BC. Environmental effects on fibre reinforced polymeric composites: Evolving reasons and remarks on interfacial strength and stability. Adv. Colloid Interface Sci. 2015;217:43-67. https://doi.org/10.1016/j.cis.2014.12.005
[33] Al-Maharma AY, Sendur P. Review of the main factors controlling the fracture toughness and impact strength properties of natural composites. Mater. Res. Express. 2018;6(2):022001. https://doi.org/10.1088/2053-1591/aaec28
[34] Yang Z, Li W, Chen Y, et al. Life assessment of thermomechanical fatigue in a woven SiC/SiC ceramic matrix composite with an environmental barrier coating at elevated temperature. Int. J. Fatigue. 2023;172:107584. https://doi.org/10.1016/j.ijfatigue.2023.107584
[35] Fu Y, Yao X. A review on manufacturing defects and their detection of fiber reinforced resin matrix composites. Compos. C: Open Access. 2022;8:100276. https://doi.org/10.1016/j.jcomc.2022.100276
[36] Kumar N, Dixit A, Kumar N, et al. Nanomaterials-enabled lightweight military platforms. Nanotechnology for defence applications. 2019:205-54. https://doi.org/10.1007/978-3-030-29880-7_6
[37] Gao Y, Li Z, Wei X, et al. Advanced lightweight composite shells: Manufacturing, mechanical characterizations and applications. Thin-Walled Struct. 2024:112286. https://doi.org/10.1016/j.tws.2024.112286
[38] Glass D. Ceramic matrix composite (CMC) thermal protection systems (TPS) and hot structures for hypersonic vehicles. In 15th AIAA international space planes and hypersonic systems and technologies conference 2008 Apr 28 (p. 2682). https://doi.org/10.2514/6.2008-2682
[39] Thakur A, Kumar A. Cellulose-composites as corrosion inhibitors. In Biopolymers in Sustainable Corrosion Inhibition (pp. 217-260). CRC Press.
[40] Nichols RK, Carter CM, Drew II JV, et al. Progress in hypersonics missiles and space defense [Slofer]. Cyber-Human Systems, Space Technologies, and Threats. 2023 Aug 15.
[41] Kumar M, Devi C, Hemath M, et al. Prospects of ceramic matrix composites in engineering and commercial applications. Applications of Composite Materials in Engineering. 2025:419-36. https://doi.org/10.1016/B978-0-443-13989-5.00017-6
[42] Simões S. High-performance advanced composites in multifunctional material design: State of the art, challenges, and future directions. Materials. 2024;17(23):5997. https://doi.org/10.3390/ma17235997
[43] Zhang C, Wang X, Jiao F, et al. Advances in the processing of ceramic matrix composites: a review. J. Adv. Manuf. Technol. 2025:1-39.https://doi.org/10.1007/s00170-025-15430-0
[44] Cho J, Boccaccini AR, Shaffer MS. Ceramic matrix composites containing carbon nanotubes. J. Mater. Sci. 2009;44:1934-51.https://doi.org/10.1007/s10853-009-3262-9
[45] Grande DH, Mandell JF, Hong KC. Fibre-matrix bond strength studies of glass, ceramic, and metal matrix composites. J. Mater. Sci. 1988;23:311-28.https://doi.org/10.1007/BF01174071
[46] Evans AG. Ceramics and ceramic composites as high-temperature structural materials: challenges and opportunities. Philosophical Transactions of the Royal Society of London. Series A: Physical and Engineering Sciences. 1995;351(1697):511-27.https://doi.org/10.1098/rsta.1995.0050
[47] Binner J, Porter M, Baker B, et al. Selection, processing, properties and applications of ultra-high temperature ceramic matrix composites, UHTCMCs–a review. International Materials Reviews. 2020;65(7):389-444.https://doi.org/10.1080/09506608.2019.1652006
[48] Lakhdar Y, Tuck C, Binner J, et al. Additive manufacturing of advanced ceramic materials. Prog. Mater. Sci. 2021;116:100736. https://doi.org/10.1016/j.pmatsci.2020.100736
[49] Liu H, Liu D, Cheng X, et al. Improved energy absorption capacity of Al/Al2O3 foams by the ductile/brittle hybrid deformation mode. Mater. Today Commun. 2022;33:104713. https://doi.org/10.1016/j.mtcomm.2022.104713
[50] Wang L, Kelly PV, Ozveren N, et al. Multifunctional polymer composite coatings and adhesives by incorporating cellulose nanomaterials. Matter. 2023;6(2):344-72. https://doi.org/10.1016/j.matt.2022.11.024
[51] Schmidt S, Beyer S, Knabe H, et al. Advanced ceramic matrix composite materials for current and future propulsion technology applications. Acta Astronautica. 2004;55(3-9):409-20.https://doi.org/10.1016/j.actaastro.2004.05.052
[52] Hu Y, Cong W. A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites. Ceramics International. 2018;44(17):20599-612.https://doi.org/10.1016/j.ceramint.2018.08.083
[53] Marini D, Cunningham D, Corney JR. Near net shape manufacturing of metal: a review of approaches and their evolutions. Proc. Inst. Mech. Eng. Pt. B J. Eng. Manufact. 2018;232(4):650-69. https://doi.org/10.1177/0954405417708220
[54] LeBlanc S, Yee SK, Scullin ML, et al. Material and manufacturing cost considerations for thermoelectrics. Renew. Sustain. Energy Rev. 2014;32:313-27. https://doi.org/10.1016/j.rser.2013.12.030
[55] Zhang H. Optimization and efficiency improvement of robot-based industrial production process. Int. J. New Dev. Eng. Soc. 2024;8(2):92-97. https://doi.org/10.25236/IJNDES.2024.080214
Journal of Polymer and Composites
| Volume | 13 |
| 03 | |
| Received | 26/12/2024 |
| Accepted | 24/01/2025 |
| Published | 08/04/2025 |
| Publication Time | 103 Days |