Open Access
Dr. Vikram Keru Dhatrak,
Dr. Prachi Subhash Kapse,
Dr. Kunal Kishor Chandan,
Dr. Rahul Atmaram Wagh,
Dr. Gajanan Zumbarlal Jadhav,
- Assistant Professor Sandip Institute of Technology & Reserch Centre, Nashik Maharashtra India
- Assistant Professor Sandip Institute of Technology & Reserch Centre, Nashik Maharashtra India
- Assistant Professor Sandip University Sijoul Bihar India
- Assistant Professor Sandip University, Nashik Maharashtra India
- Assistant Professor Sandip Institute of Technology & Reserch Centre, Nashik Maharashtra India
Abstract
This study looks into the most advanced ways to make alloy-infused nanocomposites and how they react to different materials. It focuses on how these nanocomposites can be used to process and make plastics and composites. A lot of people are interested in alloy-infused nanocomposites because they have better mechanical, thermal, and electrical qualities than regular composites. The goal of this study is to improve the methods used for making nanocomposites so that the metal nanoparticles are evenly distributed and fully integrated into the polymer matrix. This will make the nanocomposites work better overall. We start by looking at different ways to make metal nanoparticles, such as in-situ polymerization, melt mixing, and solution casting, to find the best way to make them evenly spread. The study also looks into how different production factors, like temperature, mixing speed, and the amount of nanoparticles used, affect the nanocomposites’ structure and functional qualities. A full material reaction study is done to check the synthetic nanocomposites’ mechanical qualities (such as tensile strength, stiffness, and impact resistance), temperature stability, and ability to conduct electricity. To look at the nanoparticles’ architecture and how well they are spread out, advanced methods like scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD) are used. The findings show that using the best methods for manufacturing greatly improves the material qualities of alloy-infused nanocomposites. This means that these materials can be used in many different fields, such as the electronics, aircraft, and automobile industries. The study also looks at the problems that come up with making these synthesis methods scalable and repeatable, giving us ideas for possible answers that could be used in industry.
Keywords: Alloy-Infused Nanocomposites, Advanced Synthesis Methods, Material Response Analysis, Polymer Composites, Mechanical Properties, Thermal Stability
References
- Siddiqui, M.N.; Redhwi, H.H.; Tsagkalias, I.; Softas, C.; Ioannidou, M.D.; Achilias, D. Synthesis and characterization of poly(2-hydroxyethyl methacrylate)/silver hydrogel nanocomposites prepared via in situ radical polymerization. Thermochim. Acta 2016, 643, 53–64.
- Poudel, M.B, Kim, A.A. Silver nanoparticles decorated TiO2 nanoflakes for antibacterial properties. Inorg. Chem. Commun. 2023, 152, 110675.
- Poudel, M.B, Shin, M, Kim, H.J. Polyaniline-silver-manganese dioxide nanorod ternary composite for asymmetric supercapacitor with remarkable electrochemical performance. Int. J. Hydrog. Energy 2021, 46, 474–485.
- Marambio-Jones, C, Hoek, E.M.V. A review of the antibacterial effects of silver nanomaterials and potential implications for human health and the environment. J. Nanoparticle Res. 2010, 12, 1531–1551.
- González-Henríquez, C.M, Pizarro, G.D.C, Sarabia-Vallejos, M.A, Terraza, C.A, López-Cabaña, Z.E. In situ-preparation and characterization of silver-HEMA/PEGDA hydrogel matrix nanocomposites: Silver inclusion studies into hydrogel matrix. Arab. J. Chem. 2014, 12, 1413–1423.
- Kassaee, M.Z, Mohammadkhani, M, Akhavan, A, Mohammadi, R. In situ formation of silver nanoparticles in PMMA via reduction of silver ions by butylated hydroxytoluene. Struct. Chem. 2011, 22, 11–15.
- Espitia, P, Soares, N.D, Coimbra, J.D, de Andrade, N, Cruz, R, Medeiros, E. Zinc oxide nanoparticles: Synthesis, antimicrobial activity and food packaging applications. Food Bioprocess Technol. 2012, 5, 1447–1464.
- Ashwath, P, Xavior, M.A, Rajendran, R, Batako, A.D.L, Jeyapandiarajan, P, Joel, J. Microwave-assisted T6 heat treating of aluminium alloy-Al2O3 nanocomposites. MRS Commun. 2022, 12, 245–249.
- Zhao, Z. Microwave-assisted synthesis of vanadium and chromium carbides nanocomposite and its effect on properties of WC-8Co cemented carbides. Scr. Mater. 2016, 120, 103–106.
- Ajani, S. N. ., Khobragade, P. ., Dhone, M. ., Ganguly, B. ., Shelke, N. ., & Parati, N. . (2023). Advancements in Computing: Emerging Trends in Computational Science with Next-Generation Computing. International Journal of Intelligent Systems and Applications in Engineering, 12(7s), 546–559
- Xu, M, Li, C, Kurniawan, R, Park, G, Chen, J, Ko, T.J. Study on surface integrity of titanium alloy machined by electrical discharge-assisted milling. J. Mater. Process. Technol. 2021, 299, 117334.
- Sahin, B, Aygün, A, Gündüz, H, Sahin, K, Demir, E, Akocak, S, Sen, F. Cytotoxic Effects of Platinum Nanoparticles Obtained from Pomegranate Extract by the Green Synthesis Method on the MCF-7 Cell Line. Colloids Surf. B Biointerfaces 2018, 163, 119–124.
- Gurunathan, S, Jeyaraj, M, Kang, M.-H, Kim, J.-H. The Effects of Apigenin-Biosynthesized Ultra-Small Platinum Nanoparticles on the Human Monocytic THP-1 Cell Line. Cells 2019, 8, 444.
- Gurunathan, S, Kang, M.-H, Jeyaraj, M, Kim, J.-H. Differential immunomodulatory effect of graphene oxide and vanillin-functionalized graphene oxide nanoparticles in human acute monocytic leukemia cell line (THP-1). Int. J. Mol. Sci. 2019, 20, 247.
- Safdar, M, Ozaslan, M, Khailany, R.A, Latif, S, Junejo, Y, Saeed, M, Al-Attar, M.S, Kanabe, B.O. Synthesis, Characterization and Applications of a Novel Platinum-Based Nanoparticles: Catalytic, Antibacterial and Cytotoxic Studies. J. Inorg. Organomet. Polym. Mater. 2020, 30, 2430–2439.
- David, L, Moldovan, B. Green Synthesis of Biogenic Silver Nanoparticles for Efficient Catalytic Removal of Harmful Organic Dyes. Nanomaterials 2020, 10, 202.
- Tsou, C.H, Yao, W.H, Hung, W.S, Suen, M.C, De Guzman, M.R, Chen, J, Tsou, C.Y, Wang, R.Y, Chen, J.C, Wu, C.S. Innovative plasma process of grafting methyl diallyl ammonium salt onto polypropylene to impart antibacterial and hydrophilic surface properties. Ind. Eng. Chem. Res. 2018, 57, 2537–2545.
- Ahmad, J, Burduhos-Nergis, D.D, Arbili, M.M, Alogla, S.M, Majdi, A, Deifalla, A.F. A review on failure modes and cracking behaviors of polypropylene fibers reinforced concrete. Buildings 2022, 12, 1951.
- De Albuquerque, T.L, Júnior, J.E.M, de Queiroz, L.P, Ricardo, A.D.S, Rocha, M.V.P. Polylactic acid production from biotechnological routes: A review. Int. J. Biol. Macromol. 2021, 186, 933–951.
- Ilyas, R.A, Zuhri, M.Y.M, Aisyah, H.A, Asyraf, M.R.M, Hassan, S.A, Zainudin, E.S, Sari, N.H. Natural fiber-reinforced polylactic acid, polylactic acid blends and their composites for advanced applications. Polymers 2022, 14, 202.
- Tsou, C.Y, Wu, C.L, Tsou, C.H, Chiu, S.H, Suen, M.C, Hung, W.S. Biodegradable composition of poly (lactic acid) from renewable wood flour. Polym. Sci. Ser. B 2015, 57, 473–480.
- Tsou, C.H, Kao, B.J, Suen, M.C, Yang, M.C, Wu, T.Y, Tsou, C.Y, Lai, J.Y. Crystallisation behaviour and biocompatibility of poly (butylene succinate)/poly (lactic acid) composites. Mater. Res. Innov. 2014, 18 (Suppl. S2), 372–376.
- Palanisamy, S., Murugesan, T. M., Palaniappan, M., Santulli, C., Ayrilmis, N., and Alavudeen, A. (2024). “Selection and processing of natural fibers and nanocellulose for biocomposite applications: A brief review,” BioResources 19(1), 1789-1813.
- Karuppiah, G.; Kuttalam, K.C.; Palaniappan, M.; Santulli, C.; Palanisamy, S. Multiobjective Optimization of Fabrication Parameters of Jute Fiber/Polyester Composites with Egg Shell Powder and Nanoclay Filler. Molecules 2020, 25, 5579. https://doi.org/10.3390/molecules25235579
- Karuppiah, G.; Kuttalam, K.C.; Ayrilmis, N.; Nagarajan, R.; Devi, M.P.I.; Palanisamy, S.; Santulli, C. Tribological Analysis of Jute/Coir Polyester Composites Filled with Eggshell Powder (ESP) or Nanoclay (NC) Using Grey Rational Method. Fibers 2022, 10, 60. https://doi.org/10.3390/fib10070060
- Mageshwaran, V., Sivasubramanian, P., Kumar, P., Nagaraju, Y. (2023). Antibacterial Response of Nanostructured Chitosan Hybrid Materials. In: Swain, S.K., Biswal, A. (eds) Chitosan Nanocomposites. Biological and Medical Physics, Biomedical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-9646-7_7
- Armstrong Michael, Mahadevan Sivasubramanian, Selvapalam Narayanan, Santulli Carlo, Palanisamy Sivasubramanian, Fragassa Cristiano, “Augmenting the double pipe heat exchanger efficiency using varied molar Ag ornamented graphene oxide (GO) nanoparticles aqueous hybrid nanofluids”, Frontiers in Materials, VOLUME 10,2023 , 10.3389/fmats.2023.1240606.
Journal of Polymer and Composites
Volume | |
Received | May 16, 2024 |
Accepted | June 26, 2024 |
Published | July 16, 2024 |